18-Inch to 30-Inch Peterson Real Fyre American Oak Vented Propane Gas Log Set

The 18-Inch to 30-Inch Peterson Real Fyre American Oak Vented Propane Gas Log Set is an impeccable display of a realistic fireplace, providing high performance in setting forth soothing warmth into your home. It does not take too much preparation time, mess, or quite a lot of maintenance as you would for a traditional log set. This set is well-crafted and painted by hand with real-looking detail to perfectly go with any interior design. This American Oak Vented Propane Gas Log Set comes with a burner kit, making it an excellent combination to project a long-lasting operation.

How to build your log set?

Step 1: Choose a log size
The size of the log set should be appropriate to your fireplace:

Measure your fireplace taking the front width (A), the rear width (B) and the depth (C).

Use the log set size meeting your fireplace's minimum dimensions.

"A" - Minimum 2" to 6" on each side of the nominal set size. In other words, if you are planning to use a 24" log set, the front opening dimension of your fireplace (A) should be at least 28".

"B" - Not less than nominal set size. So if you are planning to use a 24" log set, the rear dimension of your fireplace (B) should be at least 24" wide.

"C" - Minimum 12" to 14" (16" to 18" for see-through fireplaces).

Be careful when measuring a Pre-Fab fireplace. You will typically need a 36" fireplace (A dimension) for a 24" log set.

Step 2: Select a burner
The burner that you chose must match the log size that you picked.

PETERSON G4 BURNER:The G4 Glowing Ember Burner System gives out an authentic glowing ember bed and dancing flames that streams through the log set to make a pleasingly real, wood-burning interior campfire. This burner features a steel body presented with black paint resisting heat from the burner's 120,000 BTU emissions.

• Entry Level Single Pipe Burner
• Produces a glowing "hot coal" look
• Separate control valve to be connected at installation

PETERSON G45 BURNER:The G45 Triple T-Burner system offers a T-shaped, an additional front burner to emphasize the front ember presentation and puts more depth to the flame. You will see more glowing embers and a small row of flames in the front with this burner, setting forth a more realistic effect for your fireplace. This burner is compatible with most Real-Fyre log styles and controls.

• Upgraded Double Pipe Burner
• Increased depth of flame and heat
• Produces a glowing "hot coal" look
• Separate control valve to be connected at installation

Step 3: Choose a valve control

• The Peterson RealFyre Safety Pilot Kit (5RP-SPK26 ) is a terrific pilot system that provides manual variable flame control. It has a low-profile make and includes a heat shield. The Peterson SPK-26 Safety Pilot System is compatible with most RealFyre vented burners.
• Real Fyre APK-11 Remote On/Off Pilot System (5RP-APK11 ) allows you to manage your system using a remote control, wall switch, or the manual knob on the burner system. This system does not have variable flame height control, displaying the flame always at the same height. The remote is included.
• The Peterson RealFyre Automatic Variable Flame Pilot Kit (5RP-APK15) can adjust the flame height and heat output with an included remote control.

• Vented
• Reinforced with steel rods
• Durably constructed of ceramic
• Includes G4 Glowing Ember Burner System
• Hand-painted and handcrafted from real wood samples
• 65,000 BTU (50,000 for 18'' - 20'') emissions