18-Inch to 30-Inch Peterson Real Fyre Charred Oak Vented Natural Gas Log Set

Marvel at the beauty of this 18-Inch to 30-Inch Peterson Real Fyre Charred Oak Vented Natural Gas Log presenting a skillfully handcrafted and painted fireplace set. It projects a distinctive character, stunning look, and high-performing system to match heating systems that use actual wood for burning. Each set is carefully detailed with textured barks, knot holes, and a burned-through center log to create the aura of a real-looking fireplace.

This Charred Oak Gas Log Set comes with a Burner Kit that includes a custom log grate, glowing embers, silica sand, a bendable connector kit with brass fittings for a half-inch line, grate clamps, a damper clamp, and installation instructions.

California Prop 65 Notice - WARNING: This product can expose you to carbon monoxide, known to the State of California to cause birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov

• Flexible installation options
• Minimal installation is required
• Installation for heat or ambiance
• No mess, require little maintenance
• Realistic logs and flame presentation
• Reinforced ceramic build will last for years
• Clean, convenient and easy fire in seconds
• Enhances aesthetic appeal whether turned on or off

Gas Log Set Installation:

Step 1: Choose a log size
The size of your log set should be appropriate to your fireplace using the following guidelines:

Measure your fireplace taking the front width (A), the rear width (B) and the depth (C).

The size of the log set must meet with the minimum dimensions of your fireplace.

"A" - Minimum 2" to 6" on each side of the nominal set size. In other words, if you are planning to use a 24" log set, the front opening dimension of your fireplace (A) should be at least 28".

"B" - Not less than nominal set size. So if you are planning to use a 24" log set, the rear dimension of your fireplace (B) should be at least 24" wide.

"C" - Minimum 12" to 14" (16" to 18" for see-through fireplaces).

Be careful when measuring a Pre-Fab fireplace. You need a 36" fireplace (A dimension) for a 24" log set.

Step 2: Select a burner
The burner must match the log size that you have chosen. Pick a burner series based on the systems below:

PETERSON G4 BURNER:The G4 Glowing Ember Burner System produces an authentic glowing ember bed and dancing flames that cascade throughout the log set to create a real, wood burning fire experience. The G4 Glowing Ember Burner features steel construction and is coated with a black heat-resistant paint that can hold the burner's 90,000 BTU (75,000 for 18'' - 20'') emissions.

• Entry Level Single Pipe Burner
• Produces a glowing "hot coal" look
• Separate control valve to be connected at installation

PETERSON G45 BURNER:The G45 Triple T-Burner system offers a T-shaped, extra front burner emphasizing the front ember presentation and puts more depth to the flame. You will see more glowing embers and a small row of flames in the front with this burner, highlighting more realism for your fireplace. This burner is compatible with most Real-Fyre log styles and controls.

• Upgraded Double Pipe Burner
• Increased depth of flame and heat
• Produces a glowing "hot coal" look
• Separate control valve to be connected at installation

Step 3: Choose a valve control
You will need to choose one of the valves listed below to complete your gas log set.

• The Peterson RealFyre Safety Pilot Kit (5RP-SPK26 ) is a standing pilot system that offers manual variable flame control. It features a low profile build and includes a heat shield. The Peterson SPK-26 Safety Pilot System is compatible with most RealFyre vented burners.
• Real Fyre APK-11 Remote On/Off Pilot System (5RP-APK11 ) manages your system using a remote control, wall switch, or the manual knob on the burner system. This system does not have variable flame height control, thus the flame is always displayes at the same height. The remote is included.
• The Peterson RealFyre Automatic Variable Flame Pilot Kit (5RP-APK15) has an adjustable flame height and heat output with an included remote control.

Customers are responsible for checking local codes and regulations before purchase.

• Vented
• Measures 30"
• Reinforced with steel rods
• Durably constructed of ceramic
• Includes G4 Glowing Ember Burner System
• Hand-painted and handcrafted from real wood samples
• 90,000 BTU (75,000 for 18'' - 20'') emissions