Menu

3'' Selkirk VP Pellet Vent Pipe Double Tee with Cap - 3VP-TD - Less Than Perfect

3'' Selkirk VP Pellet Vent Pipe Double Tee with Cap
SKU: NLE5SE_3VP_TD_LTP
MPN: 243103-BREAK CASE
$179.99
$79.82


(No reviews yet) Write a Review
RECOMMENDED USES

    Product Note:. Product may have been exposed to water, and minor scratches/dirt/rust may be present. Does not affect the functionality or integrity of the product. Discounted to sell.

    Less Than Perfect Items are sold AS-IS and CANNOT be returned.

    Selkirk VP Pellet Pipe Double Tee with Tee Cap is used for a 90° offsets and can be used in vertical and horizontal installations. Features proven gasketed coupling joints that connect in seconds to assure joint integrity. Available in 3" and 4" diameters constructed of 304 stainless steel inner wall and paintable galvanized outer wall. Internal spacing bead assures uniform insulating air space between pipe walls,...
In Stock

Only 1 left, order now!

$179.99
$79.82
  • Details

    Selkirk VP Pellet Pipe Double Tee with Tee Cap is used for a 90° offsets and can be used in vertical and horizontal installations. Features proven gasketed coupling joints that connect in seconds to assure joint integrity. Available in 3" and 4" diameters constructed of 304 stainless steel inner wall and paintable galvanized outer wall. Internal spacing bead assures uniform insulating air space between pipe walls, and allows for 3" clearance to combustible materials. Male end is rolled over eliminating sharp edges.

    VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).

    See all 3" VP Pellet Pipe Components

    Product Note:. Product may have been exposed to water, and minor scratches/dirt/rust may be present. Does not affect the functionality or integrity of the product. Discounted to sell.

    Less Than Perfect Items are sold AS-IS and CANNOT be returned.


    Additional Information:

    Product Note:. Product may have been exposed to water, and minor scratches/dirt/rust may be present. Does not affect the functionality or integrity of the product. Discounted to sell.

    Less Than Perfect Items are sold AS-IS and CANNOT be returned.

    Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570°F.

      Installation Instructions


    Specifications:
    • Diameter: 3"
    • Construction Materials: 304 Stainless Steel Inner Wall, Paintable Galvanized Outer Wall
    • Clearance: 3" to Combustible Material
    • Listings: UL 103, ULC S609, ULC/ORD C441 and UL 641
  • Additional Information
    Clearance Clearance
    Country Of Origin Mexico
    Season Everyday
    Product Type Chimney Pipe
    Diameter 3 Inch
    Pipe Piece Tee
    Pipe Wall Double Wall
    Type Pellet Vent Pipe
    Right Overlay Image clearance-prod-1.png

Selkirk VP Pellet Pipe Double Tee with Tee Cap is used for a 90° offsets and can be used in vertical and horizontal installations. Features proven gasketed coupling joints that connect in seconds to assure joint integrity. Available in 3" and 4" diameters constructed of 304 stainless steel inner wall and paintable galvanized outer wall. Internal spacing bead assures uniform insulating air space between pipe walls, and allows for 3" clearance to combustible materials. Male end is rolled over eliminating sharp edges.

VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).

See all 3" VP Pellet Pipe Components

Product Note:. Product may have been exposed to water, and minor scratches/dirt/rust may be present. Does not affect the functionality or integrity of the product. Discounted to sell.

Less Than Perfect Items are sold AS-IS and CANNOT be returned.


Additional Information:

Product Note:. Product may have been exposed to water, and minor scratches/dirt/rust may be present. Does not affect the functionality or integrity of the product. Discounted to sell.

Less Than Perfect Items are sold AS-IS and CANNOT be returned.

Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570°F.

  Installation Instructions


Specifications:
  • Diameter: 3"
  • Construction Materials: 304 Stainless Steel Inner Wall, Paintable Galvanized Outer Wall
  • Clearance: 3" to Combustible Material
  • Listings: UL 103, ULC S609, ULC/ORD C441 and UL 641
Clearance Clearance
Country Of Origin Mexico
Season Everyday
Product Type Chimney Pipe
Diameter 3 Inch
Pipe Piece Tee
Pipe Wall Double Wall
Type Pellet Vent Pipe
Right Overlay Image clearance-prod-1.png

SPECIAL OFFER