-
Details
Selkirk Adjustable Roof Flashing is used to weather proof the penetration of vent pipe through the roof. When installing the Adjustable Roof Flashing, a storm collar is required. When choosing the proper flashing, base your decision on the pitch of the roof. The Adjustable Roof Flashing is made of galvalume and fits pitches of 0/12 - 6/12.
VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).See all 4" VP Pellet Pipe Components
Additional Information:Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570°F.
Specifications:- Diameter: 4"
- Construction Materials: 304 Stainless Steel Inner Wall, Paintable Galvanized Outer Wall
- Clearance: 3" to Combustible Material
- Listings: UL 103, ULC S609, ULC/ORD C441 and UL 641
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Product Type Chimney Pipe Diameter 4 Inch Pipe Piece Flashing Type Pellet Vent Pipe Left Overlay Image Made_in_USA_USF_prod.png
Selkirk Adjustable Roof Flashing is used to weather proof the penetration of vent pipe through the roof. When installing the Adjustable Roof Flashing, a storm collar is required. When choosing the proper flashing, base your decision on the pitch of the roof. The Adjustable Roof Flashing is made of galvalume and fits pitches of 0/12 - 6/12.
VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).See all 4" VP Pellet Pipe Components
Additional Information:
Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570°F.
Specifications:
- Diameter: 4"
- Construction Materials: 304 Stainless Steel Inner Wall, Paintable Galvanized Outer Wall
- Clearance: 3" to Combustible Material
- Listings: UL 103, ULC S609, ULC/ORD C441 and UL 641
Clearance | Non-Clearance |
---|---|
Country Of Origin | United States |
Season | Everyday |
Product Type | Chimney Pipe |
Diameter | 4 Inch |
Pipe Piece | Flashing |
Type | Pellet Vent Pipe |
Left Overlay Image | Made_in_USA_USF_prod.png |