Menu

5 Tube Fireplace Heater-With Blower - FH Combo

5 Tube Fireplace Heater-With Blower - FH Combo
SKU: NLE5GS_FHK
MPN: FH5 WITH BLOWER
$1,111.99
$749.99


(No reviews yet) Write a Review
RECOMMENDED USES
    • 2 speed blower
    • 2 speed blower (50 CFM - High, 30 CFM - Low).
    • Delivers up to 60,000 BTU's of heat
    • Diameter of tubes 1-3/4"
    • Heat Pipes are made of .063 heavy gauge aluminized steel which inhibits burn thru and rust
    • Flexible blower connector is adjustable from 8" to 18" and can be extended if necessary by ordering an additional flexible tube
    • Leg Height is 1.5''
    • See Additional information tab for sizing
In Stock: Ships in 7 to 10 business days
$1,111.99
$749.99
  • Details

     height=

    The Fireplace Heater was developed to dramatically increase convection heat (hot air) coming from your fireplace. The unique design of this grate heater super heats the air within the exchanger tubes to over 500'F and will produce up to 50,000+ BTUs of heat, enough to heat a large room or two. It fits into most fireplaces and has a limited one-year warranty. The Fireplace Heater is easy to install; simply assemble the blower on the tubes, seal it with the supplied silicone sealer, and place into your fireplace.

    The FHK Hearth Heater features heavy heavy-gauge aluminized steel tubes for long life. Its unique design still allows it to work during power outages by converting heat naturally through the tubing and into your home. The blower is connected to the grate by means of a flexible tube, which allows the blower to be positioned in front of the fireplace opening.

    Unit Size

    • Front Width: 18 1/8"
    • Rear Width: 18 1/8"
    • Front Height: 20"
    • Rear Height: 13 1/2"
    • Depth: 19"

    Top can be turned around to accommodate a deeper fireplace.

    Click here for a brochure. For smaller fireplaces see theFHZC Fireplace Heater. For wider fireplaces a custom Fireplace Heater can be ordered consisting of 6, 7, 8, 9, or 10 steel tubes. Custom sizes will take approx 2 to 4 weeks to receive.

    • Low Cost
    • Simple Installation
    • Works during a power outage
    • Fits most fireplaces (See additional information tab for sizing)
    • Heavy gauge aluminized steel tubing for long life
    • Blower Box can mount on left or right side by flipping the manifold
    • 2 speed blower (50 CFM - High, 30 CFM - Low) delivers up to 60,000 BTU's of heat for a 500% heat output increase!
    • Can be used with a glass fireplace door but additional flexible hose may be needed and must be removed to close the doors when not in use. See the Emberair Grate Heater also for glass door applications.

    Note: May be used with a gas log lighter as long as clearances allow for placement under the grate.

    BEFORE YOU BURN: There will be a smell on the first burn as the oil in the tubes will burn off. This is normal. WARNING: If you have birds and animals in the house. They should be removed from the house on the first burn. People that are asthmatic and children should also not be in the area during the first burn.


    Additional Information:

    Unit Size

    • Front Width: 18 1/8"
    • Rear Width: 18 1/8"
    • Front Height: 20"
    • Rear Height: 13 1/2"
    • Depth: 19"

      Fireplace Heater Instructions


    Specifications:
    • 2 speed blower
    • 2 speed blower (50 CFM - High, 30 CFM - Low).
    • Delivers up to 60,000 BTU's of heat
    • Diameter of tubes 1-3/4"
    • Heat Pipes are made of .063 heavy gauge aluminized steel which inhibits burn thru and rust
    • Flexible blower connector is adjustable from 8" to 18" and can be extended if necessary by ordering an additional flexible tube
    • Leg Height is 1.5''
    • See Additional information tab for sizing
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Season Everyday
    Product Type Fireplace Accessories
    Product Type Fireplace Grates
    Left Overlay Image Made_in_USA_USF_prod.png

 height=

The Fireplace Heater was developed to dramatically increase convection heat (hot air) coming from your fireplace. The unique design of this grate heater super heats the air within the exchanger tubes to over 500'F and will produce up to 50,000+ BTUs of heat, enough to heat a large room or two. It fits into most fireplaces and has a limited one-year warranty. The Fireplace Heater is easy to install; simply assemble the blower on the tubes, seal it with the supplied silicone sealer, and place into your fireplace.

The FHK Hearth Heater features heavy heavy-gauge aluminized steel tubes for long life. Its unique design still allows it to work during power outages by converting heat naturally through the tubing and into your home. The blower is connected to the grate by means of a flexible tube, which allows the blower to be positioned in front of the fireplace opening.

Unit Size

  • Front Width: 18 1/8"
  • Rear Width: 18 1/8"
  • Front Height: 20"
  • Rear Height: 13 1/2"
  • Depth: 19"

Top can be turned around to accommodate a deeper fireplace.

Click here for a brochure. For smaller fireplaces see theFHZC Fireplace Heater. For wider fireplaces a custom Fireplace Heater can be ordered consisting of 6, 7, 8, 9, or 10 steel tubes. Custom sizes will take approx 2 to 4 weeks to receive.

  • Low Cost
  • Simple Installation
  • Works during a power outage
  • Fits most fireplaces (See additional information tab for sizing)
  • Heavy gauge aluminized steel tubing for long life
  • Blower Box can mount on left or right side by flipping the manifold
  • 2 speed blower (50 CFM - High, 30 CFM - Low) delivers up to 60,000 BTU's of heat for a 500% heat output increase!
  • Can be used with a glass fireplace door but additional flexible hose may be needed and must be removed to close the doors when not in use. See the Emberair Grate Heater also for glass door applications.

Note: May be used with a gas log lighter as long as clearances allow for placement under the grate.

BEFORE YOU BURN: There will be a smell on the first burn as the oil in the tubes will burn off. This is normal. WARNING: If you have birds and animals in the house. They should be removed from the house on the first burn. People that are asthmatic and children should also not be in the area during the first burn.


Additional Information:

Unit Size

  • Front Width: 18 1/8"
  • Rear Width: 18 1/8"
  • Front Height: 20"
  • Rear Height: 13 1/2"
  • Depth: 19"

  Fireplace Heater Instructions


Specifications:
  • 2 speed blower
  • 2 speed blower (50 CFM - High, 30 CFM - Low).
  • Delivers up to 60,000 BTU's of heat
  • Diameter of tubes 1-3/4"
  • Heat Pipes are made of .063 heavy gauge aluminized steel which inhibits burn thru and rust
  • Flexible blower connector is adjustable from 8" to 18" and can be extended if necessary by ordering an additional flexible tube
  • Leg Height is 1.5''
  • See Additional information tab for sizing
Clearance Non-Clearance
Country Of Origin United States
Season Everyday
Product Type Fireplace Accessories
Product Type Fireplace Grates
Left Overlay Image Made_in_USA_USF_prod.png

SPECIAL OFFER