Menu

6'' EcoVent USA Stainless Steel Base Wall Tee Support

6'' EcoVent USA Stainless Steel Tee Support Bracket
SKU: NLE5EV_6EV_TSBSS
MPN: SHT6BWS01
$201.16
$155.62


(No reviews yet) Write a Review
RECOMMENDED USES
    EcoVent USA Class-A Chimney System 6" Stainless Steel Tee Support Bracket - The Stainless Steel Tee Support is used as a wall support for a chimney system. This bracket can be installed below the Tee and will support 50' of EcoVent Chimney. Please Note If installed below the Tee, a short section of pipe is required. Trigonal Tee Support Brackets Sold Separately
In Stock

Only 2 left, order now!

$201.16
$155.62
  • Details

    EcoVent USA Class-A Chimney System 6'' EcoVent USA Stainless Steel Base Wall Tee Support - The Stainless Steel Tee Support is used as a wall support for a chimney system. This bracket can be installed below the Tee and will support 50' of EcoVent Chimney. Please Note If installed below the Tee, a short section of pipe is required..

    EcoVent USA is a double-wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, , and zero-clearance fireplaces that are factory-built.

    Use in conjunction with the Tee, and Trigonal Tee Brackets with keep your chimney sturdy and supported for up to 50 Feet

    Assemble the Wall Support by attaching the 2 side brackets to the support plate, with the hardware supplied (female end down).

    Install one 6” Chimney Section (or longer as required) to the horizontal branch of the insulated tee. Lock securely into the tee by twisting clockwise. A locking band must then be installed at this connection. Make sure the clamp is facing down to prevent any water from collecting in the locking band. From outside the building, slide the chimney length (previously installed on a tee) through the wall thimble ensuring the male coupling on a tee is facing upward.

    Install the male end of insulated coupling section on the support plate into the female coupler of the Tee. Lock securely into the tee by twisting clockwise. Place the assembled wall support against the wall (plate up) directly below the insulated coupling section of the Wall Support. Tighten the insulated coupling section and the support plate with supplied lag screws . Then secure the whole Wall Support assembly onto wall using 14#, 2” wood screws through the pre-punched slots in each bracket. Important: Verify that Wall Support is level, and secure the leg brackets of the Tee Support to the wall . Finally, install Tee Cap into the female end of the insulated coupling section. Lock securely by twisting clockwise

    Trigonal Tee Support Brackets Sold Separately


    Additional Information:

    With a Thermal Tech blanket insulation encased between duel walls, EcoVent USA offers superior safety and performance. It keeps the outer wall cool while ensuring high flue gas temperatures for optimum draft performance. Designed for normal, continuous operation at 1000°F flue gas temperatures, .


    Specifications:
    • Diameter: 6"
    • Construction Material: Plate: 430 Stainless Steel, Other Parts: 304 Stainless Steel
    • Clearance: 2"
    • Listings: Listed to the UL 103 height standard,
    • Use in conjunction with Tee , and Tee Brackets with keep your chimney sturdy and supported for up to 50 Feet
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin China
    Season Everyday
    Product Type Chimney Pipe
    Diameter 6 Inch
    Pipe Piece Support / Brace
    Pipe Wall Double Wall
    Product Type Class A Pipe
    Type Class A Pipe

EcoVent USA Class-A Chimney System 6'' EcoVent USA Stainless Steel Base Wall Tee Support - The Stainless Steel Tee Support is used as a wall support for a chimney system. This bracket can be installed below the Tee and will support 50' of EcoVent Chimney. Please Note If installed below the Tee, a short section of pipe is required..

EcoVent USA is a double-wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, , and zero-clearance fireplaces that are factory-built.

Use in conjunction with the Tee, and Trigonal Tee Brackets with keep your chimney sturdy and supported for up to 50 Feet

Assemble the Wall Support by attaching the 2 side brackets to the support plate, with the hardware supplied (female end down).

Install one 6” Chimney Section (or longer as required) to the horizontal branch of the insulated tee. Lock securely into the tee by twisting clockwise. A locking band must then be installed at this connection. Make sure the clamp is facing down to prevent any water from collecting in the locking band. From outside the building, slide the chimney length (previously installed on a tee) through the wall thimble ensuring the male coupling on a tee is facing upward.

Install the male end of insulated coupling section on the support plate into the female coupler of the Tee. Lock securely into the tee by twisting clockwise. Place the assembled wall support against the wall (plate up) directly below the insulated coupling section of the Wall Support. Tighten the insulated coupling section and the support plate with supplied lag screws . Then secure the whole Wall Support assembly onto wall using 14#, 2” wood screws through the pre-punched slots in each bracket. Important: Verify that Wall Support is level, and secure the leg brackets of the Tee Support to the wall . Finally, install Tee Cap into the female end of the insulated coupling section. Lock securely by twisting clockwise

Trigonal Tee Support Brackets Sold Separately


Additional Information:

With a Thermal Tech blanket insulation encased between duel walls, EcoVent USA offers superior safety and performance. It keeps the outer wall cool while ensuring high flue gas temperatures for optimum draft performance. Designed for normal, continuous operation at 1000°F flue gas temperatures, .


Specifications:
  • Diameter: 6"
  • Construction Material: Plate: 430 Stainless Steel, Other Parts: 304 Stainless Steel
  • Clearance: 2"
  • Listings: Listed to the UL 103 height standard,
  • Use in conjunction with Tee , and Tee Brackets with keep your chimney sturdy and supported for up to 50 Feet
Clearance Non-Clearance
Country Of Origin China
Season Everyday
Product Type Chimney Pipe
Diameter 6 Inch
Pipe Piece Support / Brace
Pipe Wall Double Wall
Product Type Class A Pipe
Type Class A Pipe

SPECIAL OFFER