Menu

7 Tube Fireplace Heater-With Blower

7 Tube Fireplace Heater-With Blower
SKU: NLE5GS_FHK_7
MPN: FH7 WITH BLOWER
$1,999.99
$1,079.99


(No reviews yet) Write a Review
RECOMMENDED USES
    • 2 speed blower
    • 160 CFM Fan on blower
    • Delivers up to 84,000 BTU's of heat
    • Diameter of tubes 1-3/4"
    • Heat Pipes are made of .063 heavy gauge aluminized steel which inhibits burn thru and rust.
    • Flexible blower connector is adjustable from 8" to 18" and can be extended if necessary by ordering an additional flexible tube.
    • Size: 20-1/2" High (removal of legs reduces height to 18"), 20" Deep, 33" Front Width, and 25" Back Width.
    • See Additional information tab for sizing
In Stock: Ships in 7 to 10 business days
$1,999.99
$1,079.99
  • Details

    Fireplace Heater was developed to dramatically increase convection heat (hot air) coming from your fireplace. The unique design of this grate heater super heats the air within the exchanger tubes to over 500'F and will produce up to 50,000+ BTUs of heat, enough to heat a large room or two. It fits into most fireplaces and has a limited one-year warranty. The FHK Heater is easy to install; simply assemble the blower on the tubes, seal it with the supplied silicone sealer and set into your fireplace.

    The FHK Hearth Heater features heavy heavy-gauge aluminized steel tubes for long life. Its unique design still allows it to work during power outages by converting heat naturally through the tubing and into your home. The blower is connected to the grate by means of a flexible tube, which allows the blower to be positioned in front of the fireplace opening. Measures: 20-1/2" High (removal of legs reduces height to 18"), 20" Deep, 33" Front Width, and 25" Back Width.

    Click here for a brochure. For smaller fireplaces see theFHZC Fireplace Heater.

    Product Note: This fireplace heater is a custom size and will take approx 2 to 4 weeks to receive.

    • Low Cost
    • Simple Installation
    • Works during a power outage
    • Fits most fireplaces (See additional information tab for sizing)
    • Heavy gauge aluminized steel tubing for long life
    • Blower Box can mount on left or right side by flipping the manifold
    • Two 2 Speed blowers deliver up to 84,000 BTU's of heat for a 500% heat output increase!
    • Can be used with a glass fireplace door but additional flexible hose may be needed and must be removed to close the doors when not in use. See the Emberair Grate Heater also for glass door applications.

    Additional Information:
    Number of
    Tubes
    Front Width
    Rear width
    Front Height
    Rear Height
    Depth
    BTU per
    Hour
    (max)
    5 Tube (standard size)
    25"
    17"
    20 1/2"
    13 1/2"
    18"
    60,000
    6 Tubes
    29"
    21"
    20 1/2"
    13 1/2"
    18"
    72,000
    7 Tubes
    33"
    25"
    20 1/2"
    13 1/2"
    18"
    84,000
    8 Tubes
    37"
    29"
    20 1/2"
    13 1/2"
    18"
    96,000
    9 Tubes
    41"
    33"
    20 1/2"
    13 1/2"
    18"
    108,000
    10 Tubes
    45"
    37"
    20 1/2"
    13 1/2"
    18"
    120,000

    Specifications:
    • 2 speed blower
    • 160 CFM Fan on blower
    • Delivers up to 84,000 BTU's of heat
    • Diameter of tubes 1-3/4"
    • Heat Pipes are made of .063 heavy gauge aluminized steel which inhibits burn thru and rust.
    • Flexible blower connector is adjustable from 8" to 18" and can be extended if necessary by ordering an additional flexible tube.
    • Size: 20-1/2" High (removal of legs reduces height to 18"), 20" Deep, 33" Front Width, and 25" Back Width.
    • See Additional information tab for sizing
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Season Everyday
    Product Type Fireplace Accessories
    Product Type Fireplace Grates
    Left Overlay Image Made_in_USA_USF_prod.png

Fireplace Heater was developed to dramatically increase convection heat (hot air) coming from your fireplace. The unique design of this grate heater super heats the air within the exchanger tubes to over 500'F and will produce up to 50,000+ BTUs of heat, enough to heat a large room or two. It fits into most fireplaces and has a limited one-year warranty. The FHK Heater is easy to install; simply assemble the blower on the tubes, seal it with the supplied silicone sealer and set into your fireplace.

The FHK Hearth Heater features heavy heavy-gauge aluminized steel tubes for long life. Its unique design still allows it to work during power outages by converting heat naturally through the tubing and into your home. The blower is connected to the grate by means of a flexible tube, which allows the blower to be positioned in front of the fireplace opening. Measures: 20-1/2" High (removal of legs reduces height to 18"), 20" Deep, 33" Front Width, and 25" Back Width.

Click here for a brochure. For smaller fireplaces see theFHZC Fireplace Heater.

Product Note: This fireplace heater is a custom size and will take approx 2 to 4 weeks to receive.

  • Low Cost
  • Simple Installation
  • Works during a power outage
  • Fits most fireplaces (See additional information tab for sizing)
  • Heavy gauge aluminized steel tubing for long life
  • Blower Box can mount on left or right side by flipping the manifold
  • Two 2 Speed blowers deliver up to 84,000 BTU's of heat for a 500% heat output increase!
  • Can be used with a glass fireplace door but additional flexible hose may be needed and must be removed to close the doors when not in use. See the Emberair Grate Heater also for glass door applications.

Additional Information:
Number of
Tubes
Front Width
Rear width
Front Height
Rear Height
Depth
BTU per
Hour
(max)
5 Tube (standard size)
25"
17"
20 1/2"
13 1/2"
18"
60,000
6 Tubes
29"
21"
20 1/2"
13 1/2"
18"
72,000
7 Tubes
33"
25"
20 1/2"
13 1/2"
18"
84,000
8 Tubes
37"
29"
20 1/2"
13 1/2"
18"
96,000
9 Tubes
41"
33"
20 1/2"
13 1/2"
18"
108,000
10 Tubes
45"
37"
20 1/2"
13 1/2"
18"
120,000

Specifications:
  • 2 speed blower
  • 160 CFM Fan on blower
  • Delivers up to 84,000 BTU's of heat
  • Diameter of tubes 1-3/4"
  • Heat Pipes are made of .063 heavy gauge aluminized steel which inhibits burn thru and rust.
  • Flexible blower connector is adjustable from 8" to 18" and can be extended if necessary by ordering an additional flexible tube.
  • Size: 20-1/2" High (removal of legs reduces height to 18"), 20" Deep, 33" Front Width, and 25" Back Width.
  • See Additional information tab for sizing
Clearance Non-Clearance
Country Of Origin United States
Season Everyday
Product Type Fireplace Accessories
Product Type Fireplace Grates
Left Overlay Image Made_in_USA_USF_prod.png

SPECIAL OFFER