null
Menu Toggle

Menu

Search Box
Search Box

8'' DuraTech Round Ceiling Support Kit - DT810-KIT

8'' DuraTech Round Ceiling Support Kit - DT810-KIT
SKU: BNDL_NLE5SP_DT810
MPN: BNDL_NLE5SP_DT810
$709.57
    The 8" DuraTech Ceiling Support Kit contains all the components needed to install an 8" chimney (excluding black stove pipe and DuraTech chimney sections) straight up through a normal flat ceiling. This kit includes the following: (from the cap down) 8" DuraTech Rain Cap 8" DuraTech Storm Collar 8" DuraTech Flashing - Options available, see below 8" Firestop Radiation Shield (optional for use with two story installations)...

    DuraTech features light weight insulation, twist-lock fittings, support boxes with factory installed starter sections, elbows with 360° swivel base, select black finish pipe lengths, and five foot length pipe sections.

  • 8'' diameter pipe features inner wall of .020'' 430 stainless steel.
  • Outer wall options of .016'' 430 stainless steel or .021'' galvalume steel.
  • .016'' 430 stainless steel inner liner.
  • A Thermal Tech (ceramic refractory) blanket insulation is encased between walls.
  • Stainless steel end rings seal the pipe.
  • 8'' DuraTech Attic Insulation Shield - 8DT-IS
  • 8'' DuraTech 0/12 - 6/12 Adjustable Roof Flashing
  • 8'' DuraTech Flat Roof Flashing
  • 8'' DuraTech 0/12 - 6/12 Large Base Adjustable Roof Flashing - 8DT-F6L
  • 8'' DuraTech 7/12 - 12/12 Adjustable Roof Flashing - 8DT-F12
  • 8'' DuraTech 7/12 - 12/12 Large Base Adjustable Roof Flashing - 8DT-F12L
  • 8'' DuraTech 13/12 - 18/12 Adjustable Roof Flashing - 8DT-F18
  • 6'' and 8'' DuraTech Extended Roof Bracket
  • 5'' - 8'' DuraTech Spark Arrestor - 5DT-SA
Availability: Available
$709.57

  • Details

    The 8" DuraTech Ceiling Support Kit contains all the components needed to install an 8" chimney (excluding black stove pipe and DuraTech chimney sections) straight up through a normal flat ceiling.

    Included in this 8" DuraTech Kit:

    • 8" DuraTech Rain Cap
    • 8" DuraTech Storm Collar
    • 8" DuraTech Flashing
    • 8" DuraTech Ceiling Support Box
    • 8" Chimney Adapter

    Options Available Include.

    • 8" DuraTech Attic Insulation Shield (for multi-story installations)
    • 8" DuraTech Spark Arrestor
    • 8" DuraTech Extended Roof Bracket
    • 8" DuraTech Adjustable Roof Support
    • 8" DuraTech Roof Support Trim Collar

    Not Included in this kit.

    • 8" DuraBlack, or DVL Black Stove Pipe Lengths
    • 8" DuraTech Chimney Pipe Sections Lengths

    The 8" DuraTech Ceiling Support Kit contains all the components needed to install an 8" chimney (excluding black stove pipe and DuraTech chimney sections) straight up through a normal flat ceiling.

    This kit includes the following: (from the cap down)

    Diagram for 8

    8" DuraTech Chimney Cap is required where the chimney pipe terminates above the roof line. This Chimney Cap has removable screws to allow for easier cleaning of the chimney. Spark arrestor screen is sold separately.

    8" DuraTech Storm Collar this aluminum storm collar is required for use on any through-the-roof installations using a roof flashing.

    8" DuraTech Roof Flashing provides leak proof roof penetration. The purpose of the roof flashing is to weatherproof the roof where the chimney penetrates the roof. The flashing gets tucked under the shingles and the shingles are cut around the flashing if needed. The flashing is sealed to the roof with silicone to provide that needed seal to prevent water from getting under the flashing and getting into the attic or house, then a storm collar is placed over the flashing and sealed to the chimney pipe with a high temp silicone to prevent water from running down the chimney.

    8" DuraTech Attic Insulation Shield is required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. The Attic Insulation Shield fits over the Firestop Radiation Shield or Support box and consists of two-parts - a collar and a base.

    8" DuraTech Round Ceiling Support is used when passing through a flat ceiling. It includes a built-in, twist-lock starter section for DuraTech Chimney. Use a Snap-Lock Adapter, or a DuraBlack Slip Connector to transition to single-wall stovepipe or use a close clearance adapter to transition to DVL Double-Wall Stovepipe. The Round Ceiling Support requires a 14 1/2" x 14 1/2" framed opening. Included is a 1 1/2" wide trim collar. This round ceiling support will support up to 60' of DuraTech Chimney.

    New 8" DuraTech Round Support Box with complete installation kit: The new 8DT-RCS-2 support box is designed to provide everything needed for installation without requiring separate adapters.

    • Seamless Connection - Connects directly to DuraBlack single-wall stove pipe, eliminating the need for additional connectors or adjustments.
    • Universal Compatibility - Supports integration with DuraPlus, DuraTech, and other compatible chimney systems for flexible installation options.
    • Easy Snap-Fit Design - Secures into the ceiling support box or finishing collar to ensure a reliable, leak-proof connection to the chimney components.
    • Optimized for Double-Wall Stove Pipes - Suitable for connecting DVL double-wall stove pipe to the chimney, providing a strong and stable installation for both through-the-wall and ceiling setups.

    Optional extended roof bracket is required when your chimney extends more than 5' above the roof. It will provide stability to the chimney against wind and snow

    Simply add enough 8" stove pipe and class A chimney pipe to complete your installation.

    California Proposition 65 Warning SymbolWARNING: This product can expose you to chemicals including Chromium, which is known to the State Of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.govSpecifications:

  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Product Type Chimney Kits
    Product Type Chimney Pipe
    Season Everyday
    Diameter 8 Inch
    Pipe Wall Double Wall
    Type Class A Pipe
    HR-mail-only true
    Brand DuraTech

The 8" DuraTech Ceiling Support Kit contains all the components needed to install an 8" chimney (excluding black stove pipe and DuraTech chimney sections) straight up through a normal flat ceiling.

Included in this 8" DuraTech Kit:

  • 8" DuraTech Rain Cap
  • 8" DuraTech Storm Collar
  • 8" DuraTech Flashing
  • 8" DuraTech Ceiling Support Box
  • 8" Chimney Adapter

Options Available Include.

  • 8" DuraTech Attic Insulation Shield (for multi-story installations)
  • 8" DuraTech Spark Arrestor
  • 8" DuraTech Extended Roof Bracket
  • 8" DuraTech Adjustable Roof Support
  • 8" DuraTech Roof Support Trim Collar

Not Included in this kit.

  • 8" DuraBlack, or DVL Black Stove Pipe Lengths
  • 8" DuraTech Chimney Pipe Sections Lengths

The 8" DuraTech Ceiling Support Kit contains all the components needed to install an 8" chimney (excluding black stove pipe and DuraTech chimney sections) straight up through a normal flat ceiling.

This kit includes the following: (from the cap down)

Diagram for 8

8" DuraTech Chimney Cap is required where the chimney pipe terminates above the roof line. This Chimney Cap has removable screws to allow for easier cleaning of the chimney. Spark arrestor screen is sold separately.

8" DuraTech Storm Collar this aluminum storm collar is required for use on any through-the-roof installations using a roof flashing.

8" DuraTech Roof Flashing provides leak proof roof penetration. The purpose of the roof flashing is to weatherproof the roof where the chimney penetrates the roof. The flashing gets tucked under the shingles and the shingles are cut around the flashing if needed. The flashing is sealed to the roof with silicone to provide that needed seal to prevent water from getting under the flashing and getting into the attic or house, then a storm collar is placed over the flashing and sealed to the chimney pipe with a high temp silicone to prevent water from running down the chimney.

8" DuraTech Attic Insulation Shield is required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. The Attic Insulation Shield fits over the Firestop Radiation Shield or Support box and consists of two-parts - a collar and a base.

8" DuraTech Round Ceiling Support is used when passing through a flat ceiling. It includes a built-in, twist-lock starter section for DuraTech Chimney. Use a Snap-Lock Adapter, or a DuraBlack Slip Connector to transition to single-wall stovepipe or use a close clearance adapter to transition to DVL Double-Wall Stovepipe. The Round Ceiling Support requires a 14 1/2" x 14 1/2" framed opening. Included is a 1 1/2" wide trim collar. This round ceiling support will support up to 60' of DuraTech Chimney.

New 8" DuraTech Round Support Box with complete installation kit: The new 8DT-RCS-2 support box is designed to provide everything needed for installation without requiring separate adapters.

  • Seamless Connection - Connects directly to DuraBlack single-wall stove pipe, eliminating the need for additional connectors or adjustments.
  • Universal Compatibility - Supports integration with DuraPlus, DuraTech, and other compatible chimney systems for flexible installation options.
  • Easy Snap-Fit Design - Secures into the ceiling support box or finishing collar to ensure a reliable, leak-proof connection to the chimney components.
  • Optimized for Double-Wall Stove Pipes - Suitable for connecting DVL double-wall stove pipe to the chimney, providing a strong and stable installation for both through-the-wall and ceiling setups.

Optional extended roof bracket is required when your chimney extends more than 5' above the roof. It will provide stability to the chimney against wind and snow

Simply add enough 8" stove pipe and class A chimney pipe to complete your installation.

California Proposition 65 Warning SymbolWARNING: This product can expose you to chemicals including Chromium, which is known to the State Of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.govSpecifications:

Clearance Non-Clearance
Country Of Origin United States
Product Type Chimney Kits
Product Type Chimney Pipe
Season Everyday
Diameter 8 Inch
Pipe Wall Double Wall
Type Class A Pipe
HR-mail-only true
Brand DuraTech