-
Details
Product Note: Product was exposed to water and has been dried out, may contain mild rust, and dirt. Can clean with rust remover, and soap/water. Does not affect the functionality or integrity of the product. Discounted to sell.
Less Than Perfect Items are sold AS-IS and CANNOT be returned.The Masonry Anchor Plate is used to support the Shasta Vent Chimney system when installed on top of a masonry fireplace. The Masonry Anchor Plate is bolted directly to a flat masonry surface and can support up to 50-ft of chimney.
Additional Information:Product Note: Product was exposed to water and has been dried out, may contain mild rust, and dirt. Can clean with rust remover, and soap/water. Does not affect the functionality or integrity of the product. Discounted to sell.
Less Than Perfect Items are sold AS-IS and CANNOT be returned.
Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist-lock end rings and quick and easy Locking Bands. The high-temperature ceramic blanket insulation is encased between the stainless steel walls of the pipe sections to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall. In installations where offsets are required up to four 30 Degree elbows, each capable of rotating 360 Degrees, can be used in the system. The Shasta Vent All-Fuel HT Chimney is ETL Listed by Intertek to the HT requirements of UL 103. Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire
Specifications:- Supports up to a 50 ft. run
- Bolts directly to a flat Masonry surface
-
Additional Information
Clearance Clearance Country Of Origin China Season Everyday Product Type Chimney Pipe Pipe Piece Anchor Plate Type Class A Pipe Right Overlay Image clearance-prod-1.png
Product Note: Product was exposed to water and has been dried out, may contain mild rust, and dirt. Can clean with rust remover, and soap/water. Does not affect the functionality or integrity of the product. Discounted to sell.
Less Than Perfect Items are sold AS-IS and CANNOT be returned.The Masonry Anchor Plate is used to support the Shasta Vent Chimney system when installed on top of a masonry fireplace. The Masonry Anchor Plate is bolted directly to a flat masonry surface and can support up to 50-ft of chimney.
Additional Information:
Product Note: Product was exposed to water and has been dried out, may contain mild rust, and dirt. Can clean with rust remover, and soap/water. Does not affect the functionality or integrity of the product. Discounted to sell.
Less Than Perfect Items are sold AS-IS and CANNOT be returned.
Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist-lock end rings and quick and easy Locking Bands. The high-temperature ceramic blanket insulation is encased between the stainless steel walls of the pipe sections to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall. In installations where offsets are required up to four 30 Degree elbows, each capable of rotating 360 Degrees, can be used in the system. The Shasta Vent All-Fuel HT Chimney is ETL Listed by Intertek to the HT requirements of UL 103. Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire
Specifications:
- Supports up to a 50 ft. run
- Bolts directly to a flat Masonry surface
| Clearance | Clearance |
|---|---|
| Country Of Origin | China |
| Season | Everyday |
| Product Type | Chimney Pipe |
| Pipe Piece | Anchor Plate |
| Type | Class A Pipe |
| Right Overlay Image | clearance-prod-1.png |
