Menu

8'' SuperPro Decorator Ceiling Support With Trim

8'' SuperPro Decorator Ceiling Support With Trim
SKU: NLE5SE_SPR8CSB
MPN: SPR8CSB
$145.49
$115.50


(No reviews yet) Write a Review
RECOMMENDED USES
    Our decorator ceiling support is used for flat ceiling support installations for a nicely finished appearance. Install it between ceiling joists, using headers to create a framework. Be sure the finishing plate is flush with the underside of the ceiling and the assembly is level and plumb. Nail or screw the decorator ceiling support to your framing through the 12 pre-drilled holes. Use 6d or 2" nails or screws, not included....
In Stock
$145.49
$115.50
  • Details
    Our decorator ceiling support is used for flat ceiling support installations for a nicely finished appearance. Install it between ceiling joists, using headers to create a framework. Be sure the finishing plate is flush with the underside of the ceiling and the assembly is level and plumb. Nail or screw the decorator ceiling support to your framing through the 12 pre-drilled holes. Use 6d or 2" nails or screws, not included. When properly installed, the decorator ceiling support will hold up to 50' of chimney.

    See all 8" Selkirk SuperPro Components.


    Additional Information:

    SuperPro is safety tested and listed to applicable UL/ULC standards.  These include USA: UL 103-HT safety standards for chimneys serving solid fuel and liquid fuel appliances.  This chimney system has been designed for use on wood stoves, fireplaces, and residential furnaces in the U.S. market.

    Allowable flue gas temperatures are as follows:

    • Maximum continuous: 1000 Degrees F / 500 Degrees C
    • Brief forced firing: 1400 Degrees F / 760 Degrees C
    • Creosote burn out: 2100 Degrees F / 1150 Degrees C

      Installation Planning Guide

      Installation Instructions


    Specifications:
    • Diameter: 8"
    • Construction materials: Cold rolled steel
    • Clearances: 2" to combustibles
    • Listings: Safety tested and listed to applicable UL/ULC standards USA: UL 103 HT
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin Canada
    Season Everyday
    Product Type Chimney Pipe
    Diameter 8 Inch
    Pipe Piece Support / Brace
    Type Class A Pipe
Our decorator ceiling support is used for flat ceiling support installations for a nicely finished appearance. Install it between ceiling joists, using headers to create a framework. Be sure the finishing plate is flush with the underside of the ceiling and the assembly is level and plumb. Nail or screw the decorator ceiling support to your framing through the 12 pre-drilled holes. Use 6d or 2" nails or screws, not included. When properly installed, the decorator ceiling support will hold up to 50' of chimney.

See all 8" Selkirk SuperPro Components.


Additional Information:

SuperPro is safety tested and listed to applicable UL/ULC standards.  These include USA: UL 103-HT safety standards for chimneys serving solid fuel and liquid fuel appliances.  This chimney system has been designed for use on wood stoves, fireplaces, and residential furnaces in the U.S. market.

Allowable flue gas temperatures are as follows:

  • Maximum continuous: 1000 Degrees F / 500 Degrees C
  • Brief forced firing: 1400 Degrees F / 760 Degrees C
  • Creosote burn out: 2100 Degrees F / 1150 Degrees C

  Installation Planning Guide

  Installation Instructions


Specifications:
  • Diameter: 8"
  • Construction materials: Cold rolled steel
  • Clearances: 2" to combustibles
  • Listings: Safety tested and listed to applicable UL/ULC standards USA: UL 103 HT
Clearance Non-Clearance
Country Of Origin Canada
Season Everyday
Product Type Chimney Pipe
Diameter 8 Inch
Pipe Piece Support / Brace
Type Class A Pipe

SPECIAL OFFER