Menu

70-Foot Architectural Series EC70 Satin Flagpole

70-Foot Architectural Series EC70 Satin Flagpole
SKU: CPEC70S
MPN: EC70S
$7,924.18 - $9,509.00

RECOMMENDED USES
    • The manufacturer of this flagpole offers a 5-year warranty.
    • This pole is available in four beautiful finishes.
    • It is proudly made in the USA.
    • It includes all the accessories and fittings you will need for installation.
    • This flagpole presents an external halyard system.
    • It comes with a revolving truck.
    • This item will ship using a freight carrier due to weight or size of the order. This item will not ship via UPS or USPS.
Available
$7,924.18 - $9,509.00
  • Details

    Wave your flags with a prominent elevation using the 70-Foot Architectural Series EC70 Satin Flagpole. This pole features an external halyard, ground set, tapered cone aluminum material. It stands 70 feet beautifully above the ground from its total shaft length of 77 feet. It has a three-piece shaft with diameters of 12 inches at the bottom and 4 inches at the top. This pole can hold steadily against a maximum of 169 mph unflagged and 105 mph flagged wind speed ratings with its 0.250 aluminum wall thickness. A 15 feet x 25 feet flag is best suitable for this lengthy flagpole.

    The Architectural Series EC70 Satin Flagpole comes with a standard satin finish and also presents three other finishes in clear, bronze, and black anodized coatings at an extra cost. Aluminum flagpoles require little maintenance to retain their natural shine. However, the satin-brushed finished flagpoles will generally keep clean with the rainfall in most areas, but because the exterior of the flagpole is aluminum, it will continue to oxidize throughout its lifetime. Special cleaning agents may be required to remove the discoloration caused by this process of oxidation. The anodized flagpoles do not encounter this problem. Anodization creates a barrier on the external surface of the aluminum flagpole, eliminating the oxidation process. Because the aluminum is not exposed to the elements with an anodized finish, it cannot oxidize. The anodized finishes allow you to clean your flagpole with simple soap and water. For this reason, we recommend the purchase of an anodized finish for your flagpoles.

    Anodized poles take maximum time to ship because they are made to order.

    Flagpoles with sizes of up to 35 feet are shipped as one-piece poles while those with size above 35 feet are delivered in sections and fitted with a self-aligning sleeve that needs no field welding. Commercial poles ship by truck and our shipping calculator is not able to accurately calculate the cost. For more information about buying a commercial grade flagpole click here.

    Standard Accessories includes:

  • Warranty Information
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Season Everyday
    Butt Diameter 12in
    Exposed Height 70ft
    Flagged Windspeed 105 MPH
    Overall Height 77ft
    Size 70ft
    Top Diameter 4in
    Unflagged Windspeed 144 mph
    Wall Thickness .250in
    Features External Halyard
    Features Revolving Truck
    Type Aluminum
    Type Commercial
    Type Traditional
    Product Type Flagpoles
    Color Clear Anodized
    Color Bronze Anodized
    Color Black Anodized
    Color Satin
    Left Overlay Image Made_in_USA_USF_prod.png
    Right Overlay Image ws_high_USF_prod.png

Wave your flags with a prominent elevation using the 70-Foot Architectural Series EC70 Satin Flagpole. This pole features an external halyard, ground set, tapered cone aluminum material. It stands 70 feet beautifully above the ground from its total shaft length of 77 feet. It has a three-piece shaft with diameters of 12 inches at the bottom and 4 inches at the top. This pole can hold steadily against a maximum of 169 mph unflagged and 105 mph flagged wind speed ratings with its 0.250 aluminum wall thickness. A 15 feet x 25 feet flag is best suitable for this lengthy flagpole.

The Architectural Series EC70 Satin Flagpole comes with a standard satin finish and also presents three other finishes in clear, bronze, and black anodized coatings at an extra cost. Aluminum flagpoles require little maintenance to retain their natural shine. However, the satin-brushed finished flagpoles will generally keep clean with the rainfall in most areas, but because the exterior of the flagpole is aluminum, it will continue to oxidize throughout its lifetime. Special cleaning agents may be required to remove the discoloration caused by this process of oxidation. The anodized flagpoles do not encounter this problem. Anodization creates a barrier on the external surface of the aluminum flagpole, eliminating the oxidation process. Because the aluminum is not exposed to the elements with an anodized finish, it cannot oxidize. The anodized finishes allow you to clean your flagpole with simple soap and water. For this reason, we recommend the purchase of an anodized finish for your flagpoles.

Anodized poles take maximum time to ship because they are made to order.

Flagpoles with sizes of up to 35 feet are shipped as one-piece poles while those with size above 35 feet are delivered in sections and fitted with a self-aligning sleeve that needs no field welding. Commercial poles ship by truck and our shipping calculator is not able to accurately calculate the cost. For more information about buying a commercial grade flagpole click here.

Standard Accessories includes:

Clearance Non-Clearance
Country Of Origin United States
Season Everyday
Butt Diameter 12in
Exposed Height 70ft
Flagged Windspeed 105 MPH
Overall Height 77ft
Size 70ft
Top Diameter 4in
Unflagged Windspeed 144 mph
Wall Thickness .250in
Features External Halyard
Features Revolving Truck
Type Aluminum
Type Commercial
Type Traditional
Product Type Flagpoles
Color Clear Anodized
Color Bronze Anodized
Color Black Anodized
Color Satin
Left Overlay Image Made_in_USA_USF_prod.png
Right Overlay Image ws_high_USF_prod.png

SPECIAL OFFER