Menu

ChimneyRx Masonry Fireplace Crack & Joint Sealant - 1/2 Gallon

ChimneyRx Masonry Fireplace Crack & Joint Sealant - 1/2 Gallon
SKU: NLE5SS_300019
MPN: 300019
$128.07
$96.05


(No reviews yet) Write a Review
RECOMMENDED USES

    ChimneyRx

    Your prescription for chimney restoration with do it yourself convenience!

    • Protect & preserve
    • Remove unsightly stains
    • Repair leaking chimneys
    • Restore damage & deterioration
In Stock
$128.07
$96.05
  • Details

    ChimneyRx Crack and Joint Sealant is used to seal larger cracks and other defects that cannot be corrected with water repellents alone. ChimneyRx Crack and Joint Sealant is a brusable, elastomeric sealant that is used to repair exterior cracks in mortar joints on chimneys, brick walls, and between concrete masonry units.

    ChimneyRx Masonry Crack and Joint Sealant seals cracks up to 1/8" wide on brick faces and at mortar and brick joint interfaces to provide waterproof protection and minimize brick mortar repair. Depending on the size of the crack, Crack and Joint Sealant will dry clear to a milky white. Once it sets, it will prevent water filtration and subsequent damage while allowing water vapors to escape.

    Using ChimneyRx Crack & Joint Sealant will solve tough leak problems without the expense of tuck pointing or surface grouting. It will not significantly change the appearance of most walls, chimneys or masonry surfaces. A slight gloss will occur on dense surfaces which will lessen over time.

    • Prevents Leaks through Mortar Joints
    • Seals Cracks up to 1/8 inch
    • Easy Brush Application

    Additional Information:

    Container Size

    Coverage Rate

    Application Method

    Application Temperature

    Dry Time

    Clean Up

    1/2 Gallon

    550 Bricks or 100 sq. ft.

    Brush

    40? - 100? F

    2 Hours

    Soap and Water

      View Product Data Sheet

      View Material Safety Data Sheet


    Specifications:
    • 1/2 Gallon
    • Allow 2 hours for drying
    • Must be stored above 32° F
    • Seals cracks up to 1/8" wide
    • Dries clear to a milky white
    • Covers 550 bricks or 100 sq. ft.
    • Easily cleans up with soap and water
    • Application temperatures between 40° F and 100° F
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Season Everyday
    Product Type Chimey Accessories
    Product Type Chimney Maintenance
    Left Overlay Image Made_in_USA_USF_prod.png

ChimneyRx Crack and Joint Sealant is used to seal larger cracks and other defects that cannot be corrected with water repellents alone. ChimneyRx Crack and Joint Sealant is a brusable, elastomeric sealant that is used to repair exterior cracks in mortar joints on chimneys, brick walls, and between concrete masonry units.

ChimneyRx Masonry Crack and Joint Sealant seals cracks up to 1/8" wide on brick faces and at mortar and brick joint interfaces to provide waterproof protection and minimize brick mortar repair. Depending on the size of the crack, Crack and Joint Sealant will dry clear to a milky white. Once it sets, it will prevent water filtration and subsequent damage while allowing water vapors to escape.

Using ChimneyRx Crack & Joint Sealant will solve tough leak problems without the expense of tuck pointing or surface grouting. It will not significantly change the appearance of most walls, chimneys or masonry surfaces. A slight gloss will occur on dense surfaces which will lessen over time.

  • Prevents Leaks through Mortar Joints
  • Seals Cracks up to 1/8 inch
  • Easy Brush Application

Additional Information:

Container Size

Coverage Rate

Application Method

Application Temperature

Dry Time

Clean Up

1/2 Gallon

550 Bricks or 100 sq. ft.

Brush

40? - 100? F

2 Hours

Soap and Water

  View Product Data Sheet

  View Material Safety Data Sheet


Specifications:
  • 1/2 Gallon
  • Allow 2 hours for drying
  • Must be stored above 32° F
  • Seals cracks up to 1/8" wide
  • Dries clear to a milky white
  • Covers 550 bricks or 100 sq. ft.
  • Easily cleans up with soap and water
  • Application temperatures between 40° F and 100° F
Clearance Non-Clearance
Country Of Origin United States
Season Everyday
Product Type Chimey Accessories
Product Type Chimney Maintenance
Left Overlay Image Made_in_USA_USF_prod.png

SPECIAL OFFER