Menu

ChimneyRX Paint and Peel Fireplace Cleaner - 1/2 Gallon

ChimneyRX Paint and Peel Fireplace Cleaner - 1/2 Gallon
SKU: NLE5SS_300444
MPN: 300444
$68.53
$51.40


(No reviews yet) Write a Review
RECOMMENDED USES
In Stock
$68.53
$51.40
  • Details


    Over time small black carbon-based particles embed into your masonry surface around your fireplace, taking away from its appearance. The most common masonry stains are as a result of smoke, soot, creosote, and dirt. Cleaning the masonry surfaces around your fireplace is an intimidating task that requires a good deal of elbow grease and time, until you try ChimneyRX Paint & Peel Fireplace Cleaner. With this revolutionary product smoke, soot, creosote, and dirt removal is easier and faster than ever!

    Paint & Peel Fireplace Cleaner can be used indoors or outdoors on stone, cultured stone, limestone, brick, marble, slate, tile, concrete, and mortar. This product is so effective and easy to use you're going to be left wonderig how you ever lived without it. So how does this fireplace cleaner work? It's as easy as 1,2,3. Paint on, let it dry, peel it off. Begin by thoroughly coating the masonry surface with the product, and leaving it to dry for 6 to 12 hours, as needed. Once thoroughly dried, it becomes an elastic-type layer which you will carefully pull back, taking with it the smoke, soot, creosote, and dirt stains that once coated your fireplace. It is also eco-friendly and free of toxic odors. That means you can give your masonry a quick make-over without worrying about the quality of air in or out of your home.

    EFStaining

    This ChimneyRX Paint & Peel Fireplace Cleaner will work on ceramic firebrick that has a carbon or dirt based stain. This ChimneyRX Paint & Peel Fireplace Cleaner will NOT work on efflorescence staining (a white crystalline deposit on surfaces of masonry, stucco or concrete) and it will NOT remove rust or oil stains. This ChimneyRX Paint & Peel Fireplace Cleaner can NOT be used on painted surfaces.

    Product Note: This item is ONLY recommended for use on porous masonry surfaces that are not finished. It is not recommended for use on finished or painted surfaces as it may damage the surface or cause irregular peeling.


    Additional Information:

    View MSDS

    View Product Data Sheet


    Specifications:
    • Water-based cleaning poultice that removes unsightly smoke, soot, creosote and dirt stains
    • Simply paint the product on the surface, allow it to dry, and then peel it off.
    • Product can be used to clean most all masonry surfaces both interior/exterior, textured or smooth
    • Environmentally Friendly - no harsh chemicals
    • Cleanup: Clean off tools with soap and water.
    • Dry Time: Product takes about 6-12 hours to dry depending on conditions.
    • When applied at 1/8''-3/16'' thickness, product will cover 20 - 40 sq. ft. per half gallon
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Season Everyday
    Product Type High Temp Paint
    Product Type Fireplace Paint
    Left Overlay Image Made_in_USA_USF_prod.png


Over time small black carbon-based particles embed into your masonry surface around your fireplace, taking away from its appearance. The most common masonry stains are as a result of smoke, soot, creosote, and dirt. Cleaning the masonry surfaces around your fireplace is an intimidating task that requires a good deal of elbow grease and time, until you try ChimneyRX Paint & Peel Fireplace Cleaner. With this revolutionary product smoke, soot, creosote, and dirt removal is easier and faster than ever!

Paint & Peel Fireplace Cleaner can be used indoors or outdoors on stone, cultured stone, limestone, brick, marble, slate, tile, concrete, and mortar. This product is so effective and easy to use you're going to be left wonderig how you ever lived without it. So how does this fireplace cleaner work? It's as easy as 1,2,3. Paint on, let it dry, peel it off. Begin by thoroughly coating the masonry surface with the product, and leaving it to dry for 6 to 12 hours, as needed. Once thoroughly dried, it becomes an elastic-type layer which you will carefully pull back, taking with it the smoke, soot, creosote, and dirt stains that once coated your fireplace. It is also eco-friendly and free of toxic odors. That means you can give your masonry a quick make-over without worrying about the quality of air in or out of your home.

EFStaining

This ChimneyRX Paint & Peel Fireplace Cleaner will work on ceramic firebrick that has a carbon or dirt based stain. This ChimneyRX Paint & Peel Fireplace Cleaner will NOT work on efflorescence staining (a white crystalline deposit on surfaces of masonry, stucco or concrete) and it will NOT remove rust or oil stains. This ChimneyRX Paint & Peel Fireplace Cleaner can NOT be used on painted surfaces.

Product Note: This item is ONLY recommended for use on porous masonry surfaces that are not finished. It is not recommended for use on finished or painted surfaces as it may damage the surface or cause irregular peeling.


Additional Information:

View MSDS

View Product Data Sheet


Specifications:
  • Water-based cleaning poultice that removes unsightly smoke, soot, creosote and dirt stains
  • Simply paint the product on the surface, allow it to dry, and then peel it off.
  • Product can be used to clean most all masonry surfaces both interior/exterior, textured or smooth
  • Environmentally Friendly - no harsh chemicals
  • Cleanup: Clean off tools with soap and water.
  • Dry Time: Product takes about 6-12 hours to dry depending on conditions.
  • When applied at 1/8''-3/16'' thickness, product will cover 20 - 40 sq. ft. per half gallon
Clearance Non-Clearance
Country Of Origin United States
Season Everyday
Product Type High Temp Paint
Product Type Fireplace Paint
Left Overlay Image Made_in_USA_USF_prod.png

SPECIAL OFFER