Menu

Super Tough Commercial Grade Sectional 20ft. Flagpole - Black Anodized

Super Tough Commercial Grade Sectional 20ft. Flagpole - Black Anodized
SKU: CP3P20BL
MPN: 320332
$620.00
$565.00


(No reviews yet) Write a Review
RECOMMENDED USES
    • FREE SHIPPING!
    • Lifetime warranty (more details)
    • 2 Times the thickness of a residential pole!
    • Wall thickness is 1/8", residential poles are only 1/16"
    • Pole is tapered from 3" at the bottom to 1 7/8" at the top
    • Made with aluminum
    • Black anodized finish for rust protection
    • Measures 20ft.
    • Made in the USA
    • Maximum flag size for this pole: 3' x 5'
    • Maximum flag size for 2 flags on this pole: 2' x 3'
    • CANNOT be used with a shoe base
In Stock

Only 7 left, order now!

$620.00
$565.00
  • Details

    This 20 ft. three-section commercial grade flagpole has the same specifications as our Commercial One Piece Special Budget Series 20 ft. poles. The big difference is THIS pole comes in three sections so it can be delivered by UPS. No outrageous freight charges to get the same high quality commercial grade flagpole!

    The maximum flag size for this pole is 3' x 5'. If you are going to fly two flags then the maximum flag sizes are two 2' x 3'.

    If you plan on flying 2 flags you will need to order an extra set of flag snaps.

    Standard Accessories (Click below to see):

    While all of our aluminum flagpoles require little maintenance to retain their natural shine, our anodized flagpoles offer an even simpler solution.  Our satin brushed finished flagpoles will generally keep clean with the rainfall in most areas, however; because the exterior of the flagpole is aluminum, it will continue to oxidize throughout its lifetime. Special cleaning agents may be required to remove the discoloration caused by this process of oxidation. Our anodized flagpoles do not encounter this problem. The process of anodization actually creates a barrier on the external surface of the aluminum flagpole, thus eliminating the oxidation process. Because the aluminum is not exposed to the elements, it cannot oxidize. The anodized finishes allow you to clean your flagpole with simple soap and water. For this reason, we recommend the purchase of an anodized finish on all of our flagpoles.

    For more information on flagpole installation:click here

  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Season Everyday
    Butt Diameter 3in
    Exposed Height 20ft
    Flagged Windspeed 71 mph
    Overall Height 22ft
    Size 20ft
    Top Diameter 1.875in
    Unflagged Windspeed 91 MPH
    Wall Thickness .125in
    Features External Halyard
    Features Stationary Truck
    Type Aluminum
    Type Commercial
    Type Sectional
    Product Type Flagpoles
    Left Overlay Image Made_in_USA_USF_prod.png

This 20 ft. three-section commercial grade flagpole has the same specifications as our Commercial One Piece Special Budget Series 20 ft. poles. The big difference is THIS pole comes in three sections so it can be delivered by UPS. No outrageous freight charges to get the same high quality commercial grade flagpole!

The maximum flag size for this pole is 3' x 5'. If you are going to fly two flags then the maximum flag sizes are two 2' x 3'.

If you plan on flying 2 flags you will need to order an extra set of flag snaps.

Standard Accessories (Click below to see):

While all of our aluminum flagpoles require little maintenance to retain their natural shine, our anodized flagpoles offer an even simpler solution.  Our satin brushed finished flagpoles will generally keep clean with the rainfall in most areas, however; because the exterior of the flagpole is aluminum, it will continue to oxidize throughout its lifetime. Special cleaning agents may be required to remove the discoloration caused by this process of oxidation. Our anodized flagpoles do not encounter this problem. The process of anodization actually creates a barrier on the external surface of the aluminum flagpole, thus eliminating the oxidation process. Because the aluminum is not exposed to the elements, it cannot oxidize. The anodized finishes allow you to clean your flagpole with simple soap and water. For this reason, we recommend the purchase of an anodized finish on all of our flagpoles.

For more information on flagpole installation:click here

Clearance Non-Clearance
Country Of Origin United States
Season Everyday
Butt Diameter 3in
Exposed Height 20ft
Flagged Windspeed 71 mph
Overall Height 22ft
Size 20ft
Top Diameter 1.875in
Unflagged Windspeed 91 MPH
Wall Thickness .125in
Features External Halyard
Features Stationary Truck
Type Aluminum
Type Commercial
Type Sectional
Product Type Flagpoles
Left Overlay Image Made_in_USA_USF_prod.png

SPECIAL OFFER