This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
CrownSaver is the original crown repair product, developed in the early 80's. It has been time tested and is still preferred by many sweeps. CrownSaver is a blend of polymer modified hydraulic cements and powdered water repellent. Simply mix one scoop CrownSaver (measuring scoop included) with three scoops fine mason's sand and water. Next, trowel over the crown at about 1/2" thickness (1/3" min.-2" max). Because CrownSaver is a cement-based coating, a 1/2" bead of caulk should be applied to the base of each flue tile to allow for expansion. CrownSaver is sold in a 30 lb. container. One pail covers about 30 sq. ft at 1/2" thickness, when properly mixed - about 3 to 5 average chimney crowns.
CrownSaver can be used alone or with the FormFoil. No forms are needed and CrownSaver sets up in just two hours. Since the waterproofing elements are contained in the coating, no need to apply waterproofing. You also get a 10 year warranty against cracks caused by shrinkage.
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Product Type Chimey Accessories Product Type Chimney Maintenance HR-mail-only true Left Overlay Image Made in the USA.png Brand ChimneySaver
CrownSaver is the original crown repair product, developed in the early 80's. It has been time tested and is still preferred by many sweeps. CrownSaver is a blend of polymer modified hydraulic cements and powdered water repellent. Simply mix one scoop CrownSaver (measuring scoop included) with three scoops fine mason's sand and water. Next, trowel over the crown at about 1/2" thickness (1/3" min.-2" max). Because CrownSaver is a cement-based coating, a 1/2" bead of caulk should be applied to the base of each flue tile to allow for expansion. CrownSaver is sold in a 30 lb. container. One pail covers about 30 sq. ft at 1/2" thickness, when properly mixed - about 3 to 5 average chimney crowns.
CrownSaver can be used alone or with the FormFoil. No forms are needed and CrownSaver sets up in just two hours. Since the waterproofing elements are contained in the coating, no need to apply waterproofing. You also get a 10 year warranty against cracks caused by shrinkage.
| Clearance | Non-Clearance |
|---|---|
| Country Of Origin | United States |
| Season | Everyday |
| Product Type | Chimey Accessories |
| Product Type | Chimney Maintenance |
| HR-mail-only | true |
| Left Overlay Image | Made in the USA.png |
| Brand | ChimneySaver |
