Menu

25-Foot Deluxe IH Series EC25IH Flagpole

25-Foot Deluxe IH Series EC25IH Flagpole
SKU: FLGPCOM1000028754
MPN: FLGPCOM1000028754
$2,575.77 - $2,987.01

RECOMMENDED USES
    • This product comes with a Lifetime Warranty (more details)
    • This flagpole suits an internal halyard system.
    • It comes with a revolving truck.
    • It includes all the accessories and fittings necessary for installation.
    • This flagpole is available in four beautiful finishes.
    • This product is made in the USA.
    • This item ships using a freight carrier due to the product's weight or size. This item does not ship through UPS or USPS.
Available
$2,575.77 - $2,987.01
  • Details

    Raise your 4-foot x 6-foot nationalistic pride with a neat flagpole installation that holds out excellently against the harshest winds. The 25-Foot Deluxe IH Series EC25IH Flagpole shows off a 25-foot above-ground stance from its total 27 feet shaft length with a 6-inch bottom diameter and 3.5-inch top diameter. This flagpole has a 0.188 aluminum wall thickness resisting a maximum unflagged wind speed rating of 222 mph and a maximum flagged wind speed of 120+ mph.

    The 25-foot Deluxe IH Series is an aluminum ground-set, internal halyard flagpole containing a winch mounted inside the flagpole shaft, operable only with a removable crank handle. While the stainless steel cable unwinds from the winch, it moves up through the flagpole shaft interior, over the truck sheave to the shaft exterior, where the retaining ring provides a sliding anchor. A heavily coated neoprene counterweight, attached to the retaining ring, allows the halyard to be lowered for fastening or removing the flag. The halyard is then raised completely out of reach of vandals.

    Offered in standard satin finish, this pole also comes in anodized clear, bronze, and black coatings available at an additional charge. These aluminum flagpoles require little maintenance to retain their natural shine, but the anodized flagpoles provide an even simpler way to sustain their flawless look. The satin brushed finished flagpoles usually keep clean with the rainfall in most areas. But since the exterior of the flagpole is aluminum, the satin poles still continue to oxidize throughout their lifetime. Special cleaning agents are necessary to remove the discoloration from oxidation. The anodized flagpoles, on one hand, creates a barrier on the external surface of the aluminum flagpole to get rid of oxidation. With the aluminum anodized and is not exposed to the elements, it cannot oxidize. The anodized finishes allow you to clean your flagpole with simple soap and water. We strongly recommend the purchase of an anodized finish for your flagpole display.

    Anodized aluminum poles take maximum time to ship because they are made to order.

    Flagpoles with sizes up to 35 feet ship as one-piece poles, while those having sizes above 35 feet ship in sections and fit with a self-aligning sleeve that requires no field welding.

  • Warranty Information
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Season Everyday
    Butt Diameter 6in
    Exposed Height 25ft
    Flagged Windspeed 120+ MPH
    Overall Height 27'
    Size 25ft
    Top Diameter 3.5in
    Unflagged Windspeed 222 MPH
    Wall Thickness .188in
    Features Internal Halyard
    Features Revolving Truck
    Type Aluminum
    Type Commercial
    Type Traditional
    Product Type Flagpoles
    Color Bronze Anodized
    Color Satin
    Color Clear Anodized
    Color Black Anodized
    Left Overlay Image Made_in_USA_USF_prod.png
  • Reviews
  • Q & A

Raise your 4-foot x 6-foot nationalistic pride with a neat flagpole installation that holds out excellently against the harshest winds. The 25-Foot Deluxe IH Series EC25IH Flagpole shows off a 25-foot above-ground stance from its total 27 feet shaft length with a 6-inch bottom diameter and 3.5-inch top diameter. This flagpole has a 0.188 aluminum wall thickness resisting a maximum unflagged wind speed rating of 222 mph and a maximum flagged wind speed of 120+ mph.

The 25-foot Deluxe IH Series is an aluminum ground-set, internal halyard flagpole containing a winch mounted inside the flagpole shaft, operable only with a removable crank handle. While the stainless steel cable unwinds from the winch, it moves up through the flagpole shaft interior, over the truck sheave to the shaft exterior, where the retaining ring provides a sliding anchor. A heavily coated neoprene counterweight, attached to the retaining ring, allows the halyard to be lowered for fastening or removing the flag. The halyard is then raised completely out of reach of vandals.

Offered in standard satin finish, this pole also comes in anodized clear, bronze, and black coatings available at an additional charge. These aluminum flagpoles require little maintenance to retain their natural shine, but the anodized flagpoles provide an even simpler way to sustain their flawless look. The satin brushed finished flagpoles usually keep clean with the rainfall in most areas. But since the exterior of the flagpole is aluminum, the satin poles still continue to oxidize throughout their lifetime. Special cleaning agents are necessary to remove the discoloration from oxidation. The anodized flagpoles, on one hand, creates a barrier on the external surface of the aluminum flagpole to get rid of oxidation. With the aluminum anodized and is not exposed to the elements, it cannot oxidize. The anodized finishes allow you to clean your flagpole with simple soap and water. We strongly recommend the purchase of an anodized finish for your flagpole display.

Anodized aluminum poles take maximum time to ship because they are made to order.

Flagpoles with sizes up to 35 feet ship as one-piece poles, while those having sizes above 35 feet ship in sections and fit with a self-aligning sleeve that requires no field welding.

Clearance Non-Clearance
Country Of Origin United States
Season Everyday
Butt Diameter 6in
Exposed Height 25ft
Flagged Windspeed 120+ MPH
Overall Height 27'
Size 25ft
Top Diameter 3.5in
Unflagged Windspeed 222 MPH
Wall Thickness .188in
Features Internal Halyard
Features Revolving Truck
Type Aluminum
Type Commercial
Type Traditional
Product Type Flagpoles
Color Bronze Anodized
Color Satin
Color Clear Anodized
Color Black Anodized
Left Overlay Image Made_in_USA_USF_prod.png

SPECIAL OFFER