25-Foot Deluxe IH Series ECXA25IH Flagpole

The 25-Foot Deluxe IH Series ECXA25IH Flagpole measures 25 feet above ground from its total 27 feet shaft length with a 5-inch bottom diameter and a 3-inch top diameter. It has a 0.156 aluminum wall thickness with a maximum unflagged wind speed rating of 192 mph and a maximum flagged wind speed of 117 mph, enabling it to withstand very windy locations. This pole best complements a flag with a 4 feet x 6 feet size.

This product is an aluminum ground-set, internal halyard flagpole with a winch mounted inside its flagpole shaft, operable only with a detachable crank handle. While the stainless steel cable unwinds from the winch, it passes up through the interior flagpole shaft, over the truck sheave to the exterior shaft, where the retaining ring provides a sliding anchor. A heavily coated neoprene counterweight, attached to the retaining ring, allows the halyard to be lowered for fastening or removing the flag. The halyard is then raised completely out of reach of vandals.

Offered in standard satin finish, this pole also comes in anodized clear, bronze, and black coatings available at an additional charge. These aluminum flagpoles require little maintenance to retain their natural shine, but the anodized flagpoles provide an even simpler way to sustain their flawless look. The satin brushed finished flagpoles usually keep clean with the rainfall in most areas. But since the exterior of the flagpole is aluminum, the satin poles still continue to oxidize throughout their lifetime. Special cleaning agents are necessary to remove the discoloration from oxidation. The anodized flagpoles, on one hand, creates a barrier on the external surface of the aluminum flagpole to get rid of oxidation. With the aluminum anodized and is not exposed to the elements, it cannot oxidize. The anodized finishes allow you to clean your flagpole with simple soap and water. We strongly recommend the purchase of an anodized finish for your flagpole display.

Anodized aluminum poles take maximum time to ship because they are made to order.

Flagpoles with sizes up to 35 feet ship as one-piece poles, while those having sizes above 35 feet ship in sections and fit with a self-aligning sleeve that requires no field welding.