35-Foot Deluxe IH Series ECSA35IH Flagpole

Let those patriotic colors stand out on top of a highly durable 35-Foot Deluxe IH Series ECSA35IH Flagpole featuring an internal halyard ground set cone tapered aluminum structure. It is 35 feet above the ground with a total length of 38.5 feet and a 3-inch top and 5-inch bottom pole diameters. It is constructed with a 0.188 aluminum wall thickness that enables it to withstand a maximum of 104 mph unflagged and 86 mph flagged wind speed ratings. This pole has a sturdy body that complements a 6 feet x 10 feet sized flag.

This flagpole consists of a winch mounted in its shaft's interior that works only through its detachable crank handle. While the stainless steel cable uncoils from the winch, it passes up through the inside of the flagpole shaft, over the truck sheave to the shaft's exterior, where the retaining ring presents a sliding anchor. This pole has a heavily covered neoprene counterweight attached to the retaining ring lowering the halyard for affixing or removing the flag. The halyard is then lifted completely out of reach of vandals.

This internal halyard shaft offers a standard satin finish but is also available in clear, bronze, and black anodized finish at an extra charge. While aluminum flagpoles need little maintenance to retain their natural shine, anodized flagpoles have a simpler way of handling them. The satin-brushed finished flagpoles usually keep clean with the rainfall in most areas, but the exterior of the flagpole is aluminum, so it oxidizes over time. Special cleaning agents may be required to get rid of the discoloration caused by oxidation. The anodized flagpoles set a blockade on the external surface of the aluminum flagpole through anodization, eliminating oxidation. The aluminum is not exposed to the elements with an anodized finish, making it hold out against oxidizing. The anodized finishes allow you to clean your flagpole with simple soap and water. It is advised that you use an anodized finish on all of your flagpole needs.

Anodized poles take maximum time to ship because they are made to order.

Flagpoles with sizes up to 35 feet ship as one-piece poles, while those that have sizes above 35 feet ship in sections and fit with a self-aligning sleeve that requires no field welding.