Emergency LED Driver - 8W Output - 90 Minute Backup Time - JN

This Constant-Power Emergency LED Driver provides constant power output to the load during emergency mode operation. Emergency LED Drivers are required by code in certain public and commercial applications.

Features

• UL Listed for US and Canada
• Listed to UL924 and tested to CSA C22.2 NO.141 Field or factory installation.
• High Voltage Output
• Low energy consumption CEC compliance
• Constant output power
• Self-testing
• Battery over temperature protection

Specifications

• Input Voltage: 100-347Vac, 50/60Hz
• Input Current: 100mA max
• Input Power Rating: 7W max
• Output Voltage: 170Vdc
• Emergency Power: 8W
• Recharge Time: 24Hrs
• Discharge Time: 90 Minutes
• Battery: Li-ion
• Warranty: 5 Years
• Ambient Temperature: 41°F ~ 122°F
• Weight: 66 lbs

Function - Indicator Light

• AC Operation, indicator light stays on
• Emergency Operation, indicator light flashes slowly (light on 2s, off 2s)
• In a failure, indicator light flashes quickly (light on 0.2s, of 0.2s)

Function - Test Switch

• In AC operation, press test switch once = emergency light operation for 30 seconds
• In AC Operation, press test switch twice within 2s = emergency light until battery is fully discharged.
• In the emergency operation, press test switch = turn off emergency status, and LED lamp & indicator light of EM driver will go out at the same time.

Self-test

• The emergency LED driver contains a control/monitor circuit which will perform a 30-second discharge test once a month and a fully discharge test once a year. At this time, the unit simulate an AC power failure and automatically switch to emergency mode. During routine testing, the unit will monitor the operation of the LED load, battery voltage, and emergency duration, if the unit detect any problems, the indicator will flash quickly.