Menu

Custom Fireplace Heater for Masonry Fireplaces

Fireplace Heater for Masonry Fireplaces
SKU: BNDL_NLE5GS_FH
MPN: BNDL_NLE5GS_FH
$1,297.72
$499.99


(No reviews yet) Write a Review
RECOMMENDED USES

    The Fireplace Heater was developed to dramatically increase convection heat (hot air) coming from your fireplace. The unique design of this grate heater super heats the air within the exchanger tubes to over 500°F and can produce up to 60,000 BTUs of heat, enough to heat a large room or two. It fits into most fireplaces and works without power by converting heat naturally through the tubing and into your home.

  • 6 Tube Fireplace Heater-No Blower
  • 7 Tube Fireplace Heater-No Blower
  • 8 Tube Fireplace Heater-No Blower
  • 9 Tube Fireplace Heater-No Blower
  • 10 Tube Fireplace Heater-No Blower
  • 8'' - 18'' Adjustable Flexible Connector Tube
In Stock: Available
$1,297.72
$499.99
  • Details

    The Fireplace Heater was developed to dramatically increase convection heat (hot air) coming from your fireplace. The unique design of this grate heater super heats the air within the exchanger tubes to over 500°F and can produce up to 60,000 BTUs of heat, enough to heat a large room or two. It fits into most fireplaces and works without power by converting heat naturally through the tubing and into your home. The tubes are made of heavy aluminized steel and are designed for long life.

    Product Note: Please see additional info tab for a list of all dimensions.

    The optional blower is capable of producing up to 60,000 BTU's of heat when used with the hearth heater. This blower can be mounted on either the left or right side of your Fireplace Hearth Heater. 5 and 6 tube units have a 2 speed blower (50 CFM - High, 30 CFM - Low). Units with 7 or more tubes have a 148 CFM blower with a variable speed control.

    • Low cost
    • Delivers up to 60,000 BTU's of heat (or more with 6 thru 10 tube models - see Additional Info tab
    • Fits most fireplaces
    • 1 year warranty
    • Simple installation
    • 500% heat output increase
    • Heavy tubing for long life
    • Works without power
    • Heat Pipes are made of .063 gauge aluminized steel which inhibits burn thru and rust.
    • Diameter of tubes 1-3/4"
    • Sizes are special order and require 3 to 4 weeks to manufacture.

    For smaller fireplaces see the Zero Clearance Fireplace Heater.

    Note: May be used with a gas log lighter as long as clearances allow for placement under the grate.

    BEFORE YOU BURN: There will be a smell on the first burn as the oil in the tubes will burn off. This is normal. WARNING: If you have birds and animals in the house. They should be removed from the house on the first burn. People that are asthmatic and children should also not be in the area during the first burn.


    Additional Information:
    Number of Tubes Front Width Rear Width Front Height Rear Height Depth BTU Per Hour (Max)*
    5 Tubes (standard size) 18 1/2" 18 1/2" 20 " 13 1/2" 19" up to 60,000
    6 Tubes (custom size) 22" 22" 20 1/2" 13 1/2" 19" up to 72,000
    7 Tubes (custom size) 25 7/8" 25 7/8" 20 1/2" 13 1/2" 19" up to 84,000
    8 Tubes (custom size) 29 3/4" 29 3/4" 20 1/2" 13 1/2" 19" up to 96,000
    9 Tubes (custom size) 33 5/8" 33 5/8" 20 1/2" 13 1/2" 19" up to 108,000
    10 Tubes (custom size) 37 1/2" 37 1/2" 20 1/2" 13 1/2" 19" up to 120,000
    * BTU output will vary depending on type of wood, size of fire, fireplace size, etc.

      Fireplace Heater Instructions


    Specifications:
    • Low cost to operate
    • Delivers up to 60,000 BTU's of heat (or more with 6 thru 10 tube models - see Additional Info under the Details & Specifications tab)
    • Fits most fireplaces
    • Simple installation
    • 500% heat output increase
    • Heat enhanced reflector wall
    • Heavy-duty tubing for long life
    • Works during power outage
    • 16 gauge aluminized metal tubing
    • Diameter of tubes 1-3/4"
    • Blower box 5 1/4" Length x 4 1/2" Wide x 5" High
    • Front Leg Height is 1.5''

    Optional Blower
    • Delivers up to 60,000 BTU's of heat when used with a hearth heater
    • 5 and 6 tube units have a 2 speed blower (50 CFM - High, 30 CFM - Low). Units with 7 or more tubes have a 148 CFM blower with a variable speed control.
    • 1 year warranty
    • Simple installation
    • 500% heat output increase
    • Trim bar has 5 - 2" diameter holes for attaching to the FH Fireplace Heater.
    • Flexible blower connector is adjustable from 8" to 18".
    • Blower Box can mount on left or right side by flipping the manifold.
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Product Type Fireplace Accessories
    Product Type Fireplace Grates
    Season Everyday
    Size 26in to 28in
    Size 33in and Over
    Size 30in to 32in
    Type Bar Grates
    Type Fireplace Heater
    Type Zero Clearance Grates

The Fireplace Heater was developed to dramatically increase convection heat (hot air) coming from your fireplace. The unique design of this grate heater super heats the air within the exchanger tubes to over 500°F and can produce up to 60,000 BTUs of heat, enough to heat a large room or two. It fits into most fireplaces and works without power by converting heat naturally through the tubing and into your home. The tubes are made of heavy aluminized steel and are designed for long life.

Product Note: Please see additional info tab for a list of all dimensions.

The optional blower is capable of producing up to 60,000 BTU's of heat when used with the hearth heater. This blower can be mounted on either the left or right side of your Fireplace Hearth Heater. 5 and 6 tube units have a 2 speed blower (50 CFM - High, 30 CFM - Low). Units with 7 or more tubes have a 148 CFM blower with a variable speed control.

  • Low cost
  • Delivers up to 60,000 BTU's of heat (or more with 6 thru 10 tube models - see Additional Info tab
  • Fits most fireplaces
  • 1 year warranty
  • Simple installation
  • 500% heat output increase
  • Heavy tubing for long life
  • Works without power
  • Heat Pipes are made of .063 gauge aluminized steel which inhibits burn thru and rust.
  • Diameter of tubes 1-3/4"
  • Sizes are special order and require 3 to 4 weeks to manufacture.

For smaller fireplaces see the Zero Clearance Fireplace Heater.

Note: May be used with a gas log lighter as long as clearances allow for placement under the grate.

BEFORE YOU BURN: There will be a smell on the first burn as the oil in the tubes will burn off. This is normal. WARNING: If you have birds and animals in the house. They should be removed from the house on the first burn. People that are asthmatic and children should also not be in the area during the first burn.


Additional Information:
Number of Tubes Front Width Rear Width Front Height Rear Height Depth BTU Per Hour (Max)*
5 Tubes (standard size) 18 1/2" 18 1/2" 20 " 13 1/2" 19" up to 60,000
6 Tubes (custom size) 22" 22" 20 1/2" 13 1/2" 19" up to 72,000
7 Tubes (custom size) 25 7/8" 25 7/8" 20 1/2" 13 1/2" 19" up to 84,000
8 Tubes (custom size) 29 3/4" 29 3/4" 20 1/2" 13 1/2" 19" up to 96,000
9 Tubes (custom size) 33 5/8" 33 5/8" 20 1/2" 13 1/2" 19" up to 108,000
10 Tubes (custom size) 37 1/2" 37 1/2" 20 1/2" 13 1/2" 19" up to 120,000
* BTU output will vary depending on type of wood, size of fire, fireplace size, etc.

  Fireplace Heater Instructions


Specifications:
  • Low cost to operate
  • Delivers up to 60,000 BTU's of heat (or more with 6 thru 10 tube models - see Additional Info under the Details & Specifications tab)
  • Fits most fireplaces
  • Simple installation
  • 500% heat output increase
  • Heat enhanced reflector wall
  • Heavy-duty tubing for long life
  • Works during power outage
  • 16 gauge aluminized metal tubing
  • Diameter of tubes 1-3/4"
  • Blower box 5 1/4" Length x 4 1/2" Wide x 5" High
  • Front Leg Height is 1.5''

Optional Blower
  • Delivers up to 60,000 BTU's of heat when used with a hearth heater
  • 5 and 6 tube units have a 2 speed blower (50 CFM - High, 30 CFM - Low). Units with 7 or more tubes have a 148 CFM blower with a variable speed control.
  • 1 year warranty
  • Simple installation
  • 500% heat output increase
  • Trim bar has 5 - 2" diameter holes for attaching to the FH Fireplace Heater.
  • Flexible blower connector is adjustable from 8" to 18".
  • Blower Box can mount on left or right side by flipping the manifold.
Clearance Non-Clearance
Country Of Origin United States
Product Type Fireplace Accessories
Product Type Fireplace Grates
Season Everyday
Size 26in to 28in
Size 33in and Over
Size 30in to 32in
Type Bar Grates
Type Fireplace Heater
Type Zero Clearance Grates

SPECIAL OFFER