This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
FlashSeal by SaverSystems seals those pesky leaks around flashings and it's so much easier to work with than tar. Simply prepare the area to be sealed. Next, apply a base coat of FlashSeal compound a few inches up the chimney and on the surrounding roof that is wide enough for the reinforcement fabric (sold separately) to cover it. Then place the reinforcement fabric over the base coat. Apply the topcoat and the job is done! FlashSeal can be applied with a brush. One gallon container covers 28 linear feet. When used with the reinforcement FlashSeal fabric this product is warrantied by the manufacturer for 7 years. Also available in white color.
Additional Information:
WARNING: This product can expose you to chemicals including quartz, which is known to the State of California to cause cancerFor more information go to http://www.P65Warnings.ca.gov.
Specifications:- 1 Gallon Container
- Coverage Rate: Approx. 28 linear feet
- Application Temp: Minimum 45 degrees Fahrenheit
- Application Method: Brush on
- Dry Time: 12 hours in dry, clear weather for proper curing
- Cleanup: Soap and Water while still wet
- Stays flexible over time
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Product Type Chimey Accessories Product Type Chimney Maintenance Return Policy Not Returnable Left Overlay Image Made in the USA.png Brand ChimneySaver
Â
FlashSeal by SaverSystems seals those pesky leaks around flashings and it's so much easier to work with than tar. Simply prepare the area to be sealed. Next, apply a base coat of FlashSeal compound a few inches up the chimney and on the surrounding roof that is wide enough for the reinforcement fabric (sold separately) to cover it. Then place the reinforcement fabric over the base coat. Apply the topcoat and the job is done! FlashSeal can be applied with a brush. One gallon container covers 28 linear feet. When used with the reinforcement FlashSeal fabric this product is warrantied by the manufacturer for 7 years. Also available in white color.
Additional Information:
WARNING: This product can expose you to chemicals including quartz, which is known to the State of California to cause cancerFor more information go to http://www.P65Warnings.ca.gov.
Specifications:
- 1 Gallon Container
- Coverage Rate: Approx. 28 linear feet
- Application Temp: Minimum 45 degrees Fahrenheit
- Application Method: Brush on
- Dry Time: 12 hours in dry, clear weather for proper curing
- Cleanup: Soap and Water while still wet
- Stays flexible over time
| Clearance | Non-Clearance |
|---|---|
| Country Of Origin | United States |
| Season | Everyday |
| Product Type | Chimey Accessories |
| Product Type | Chimney Maintenance |
| Return Policy | Not Returnable |
| Left Overlay Image | Made in the USA.png |
| Brand | ChimneySaver |
