Menu

Shasta Vent 8 Inch Storm Collar

Shasta Vent 8 Inch Storm Collar
SKU: NLE5VS_8A_SC
MPN: 8A-SC
$22.90
$22.00


(No reviews yet) Write a Review
RECOMMENDED USES
    • Construction Material: Galvanized Steel
    • Dimensions: 10'' ID x 14 5/8'' OD x 3 1/4'' Wide
    • Listings: ETL Listed by Intertek to the HT requirements of UL 103
In Stock
$22.90
$22.00
  • Details
    The Storm Collar works together with the Flashing to provide a weatherproof seal where the chimney penetrates through the roof. The Storm Collar is installed directly above the Flashing and must be sealed to the chimney using high-temperature silicone sealant (RTV 500OF or better).
    Additional Information:

    Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist-lock end rings and quick and easy Locking Bands. The high-temperature ceramic blanket insulation is encased between the stainless steel walls of the pipe sections to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall. In installations where offsets are required up to four 30 Degree elbows, each capable of rotating 360 Degrees, can be used in the system. The Shasta Vent All-Fuel HT Chimney is ETL Listed by Intertek to the HT requirements of UL 103. Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire


      ShastaVent Catalog

      Installation Instructions


    Specifications:
    • Construction Material: Galvanized Steel
    • Dimensions: 10'' ID x 14 5/8'' OD x 3 1/4'' Wide
    • Listings: ETL Listed by Intertek to the HT requirements of UL 103
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin China
    Season Everyday
    Product Type Chimney Pipe
    Diameter 8 Inch
    Pipe Piece Collar
    Type Class A Pipe
The Storm Collar works together with the Flashing to provide a weatherproof seal where the chimney penetrates through the roof. The Storm Collar is installed directly above the Flashing and must be sealed to the chimney using high-temperature silicone sealant (RTV 500OF or better).
Additional Information:

Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist-lock end rings and quick and easy Locking Bands. The high-temperature ceramic blanket insulation is encased between the stainless steel walls of the pipe sections to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall. In installations where offsets are required up to four 30 Degree elbows, each capable of rotating 360 Degrees, can be used in the system. The Shasta Vent All-Fuel HT Chimney is ETL Listed by Intertek to the HT requirements of UL 103. Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire


  ShastaVent Catalog

  Installation Instructions


Specifications:
  • Construction Material: Galvanized Steel
  • Dimensions: 10'' ID x 14 5/8'' OD x 3 1/4'' Wide
  • Listings: ETL Listed by Intertek to the HT requirements of UL 103
Clearance Non-Clearance
Country Of Origin China
Season Everyday
Product Type Chimney Pipe
Diameter 8 Inch
Pipe Piece Collar
Type Class A Pipe

SPECIAL OFFER