4ft LED T8 Tube - Type B - 20W - 2600 Lumens - 6000K - XSY

VOLUME PRICING - SAVE 2% WHEN YOU BUY A CASE OF 25! SAVE 5% WHEN YOU BUY A PALLET OF 875!

This 4ft LED T8 Direct Wire Tube is a perfect pick for any commercial or residential setting including super markets, factories, hotels, conference rooms, schools, and offices. LED Tubes are more energy efficient and longer lasting than fluorescent tubes and contain no hazardous materials! The dual rows of LEDs provide high light output of 2600 lumens. Made with aluminum back and polycarbonate plastic lens, these tubes are shatterproof.

This LED Tube is configured for Single-Ended Power, meaning this tube has a live pin and a neutral pin on the same end.  For fluorescent retrofits, you must replace one of the shunted lampholders (or tombstones) on the fluorescent fixture with a non-shunted socket. See below for more information on Single-End Power vs Double-End power.

This LED tube is DLC V5 rated and may be eligible for additional utility rebates in certain areas. Check out our Rebate Assistant tool to find if this product qualifies for you!

Existing fluorescent ballast must be bypassed for proper operation!

This LED tube is non-dimmable!

What is the difference between Single Ended vs. Double Ended Power?

Single Ended

Single Ended Power tubes are LED lamps that have neutral and live pins on the same side.

If the lamp is being installed as a retrofit into a fluorescent fixture, one of the shunted lampholders (or tombstones)on the fluorescent fixture will need to be replaced with a non-shunted lampholder. Shop Non-Shunted Sockets

Single Ended lamps installed by Direct Wire application do not need a ballast. If installing as a retrofit in a fluorescent fixture, the ballast will need to be removed and the lampholder replaced.

Double Ended

Doubled Ended Power tubes are LED lamps that have separate live and neutral ends.

These type of tubes can use both Non-Shunted Sockets and Shunted Sockets.