Menu

Custom Zero-Clearance Fireplace Heater Kit

Custom Zero Clearance Fireplace Heater
SKU: BNDL_NLE5GS_FHZC
MPN: BNDL_NLE5GS_FHZC
$599.99
$419.99

RECOMMENDED USES

    The Fireplace Heater is made dramatically with increased convection heat (hot air) coming from your fireplace. The unique design of this grate heater superheats the air within the exchanger tubes to over 500°F and can produce up to 48,000 BTUs of heat, enough to heat a large room or two. It fits into most smaller or zero-clearance (pre-fab) fireplaces and works without power by converting heat naturally through the tubing and into your home.

  • 5 Tube ZC Fireplace Heater-With Blower
  • 5 Tube ZC Fireplace Heater-With Blower
  • 5 Tube ZC Fireplace Heater-With Blower
  • 5 Tube ZC Fireplace Heater-With Blower
  • 5 Tube ZC Fireplace Heater-With Blower
  • 5 Tube ZC Fireplace Heater-With Blower
  • 8'' - 18'' Adjustable Flexible Connector Tube
In Stock: Available
$599.99
$419.99
  • Details

    Lower home heating expenses with the Custom Zero-Clearance Fireplace Heater Kit. This fireplace heat gives to the enjoyment of comforting warmth that the you won't be able to get fully from a common fireplace. The natural heat of 80% created by traditional hearths is gets lost through the chimney. This high performing energy-efficient fireplace blower provides an increased heat temperature to go around your home at a low heating cost. This grate heater has a unique setup to superheat the air inside the exchanger tubes to over 500°F, enabling it to send out up to 60,000 BTUs of heat, sufficient to give warmth into a large room or two. It excellently fits into most smaller or zero-clearance (pre-fab) fireplaces, and operates without that use of power by converting heat naturally through the heavy aluminized steel tubing, then distributed into your home. These sturdy aluminum tubes deliver a lasting usage of this product.

    Product Note: Please see additional info tab for a list of all dimensions.

    The optional blower has the capacity to send out up to 60,000 BTUs of heat when used with the hearth heater. This blower is installed on either the left or right side of your Fireplace Hearth Heater. Five and six tube units have a 2-speed blower (50 CFM - High, 30 CFM - Low). Units with seven or more tubes have a 148 CFM blower with a variable speed control.

    • This product gives a low cost heat energy.
    • It delivers up to 48,000 BTUs of heat or more with the six through ten-tube models - read the Additional Info tab for more details.
    • This fireplace blower fits smaller fireplaces.
    • It presents a 1 year warranty.
    • Get this into your home with a simple installation.
    • It offers 500% heat output increase.
    • Each unit has heavy tubing for long life use.
    • It works during power outages.
    • The Heat Pipes are made of a 0.063-gauge aluminized steel which inhibits burn through and rust.
    • The sizes in special order require three to four weeks to manufacture.

    For larger fireplaces, see the Fireplace Heater.

    Note: This heater may be used with a gas log lighter as long as clearances allow for placement under the grate.

    BEFORE YOU BURN: Normally, there will be a smell on the first burn as the oil in the tubes will burn off. WARNING: If you have birds and animals in the house, they should be removed from the house on the first burn. People that are asthmatic and children should also not be in the area during the first burn.


    Additional Information:
    Number of Tubes Front Width Rear Width Front Height Rear Height Depth BTU Per Hour (Max)*
    4 Tubes (standard size) 14 1/8" 14 1/8" 17 7/8" 14 1/2" 17 1/4" up to 48,000
    5 Tubes (custom size) 18 1/8" 18 1/8" 17 7/8" 14 1/2" 17 1/4" up to 58,000
    6 Tubes (custom size) 22" 22" 17 7/8" 14 1/2" 17 1/4" up to 68,000
    7 Tubes (custom size) 25 1/2" 25 1/2" 17 7/8" 14 1/2" 17 1/4" up to 78,000
    8 Tubes (custom size) 29 3/4" 29 3/4" 17 7/8" 14 1/2" 17 1/4" up to 88,000
    9 Tubes (custom size) 33 5/8" 33 5/8" 17 7/8" 14 1/2" 17 1/4" up to 98,000
    10 Tubes (custom size) 37 1/2" 37 1/2" 17 7/8" 14 1/2" 17 1/4" up to 108,000
    * BTU output will vary depending on type of wood, size of fire, fireplace size, etc.

      Fireplace Heater Instructions


    Specifications:
    • Low cost
    • Delivers up to 48,000 BTU's of heat (or more with 6 thru 10 tube models - see Additional Info tab
    • For use in smaller fireplaces
    • Simple installation
    • 500% heat output increase
    • Heavy tubing for long life
    • Works without power
    • Heat Pipes are made of .063 gauge aluminized steel which inhibits burn thru and rust.
    • 16 gauge aluminized metal tubing
    • Diameter of tubes 1-3/4"

    Optional Blower
    • Delivers up to 60,000 BTU's of heat when used with a hearth heater
    • Units with 5 or 6 tubes have a 2 speed blower (50 CFM - High, 30 CFM - Low). Units with 7 or more tubes have a 148 CFM blower with a variable speed control.
    • 1 year warranty
    • Simple installation
    • 500% heat output increase
    • Trim bar has 4 - 2" diameter holes for attaching to the Zero-Clearance Fireplace Heater.
    • Flexible blower connector is adjustable from 8" to 18".
    • Blower Box can mount on left or right side by flipping the manifold.
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Product Type Fireplace Accessories
    Product Type Fireplace Grates
    Season Everyday
    Size 26in to 28in
    Size 33in and Over
    Size 30in to 32in
    Type Bar Grates
    Type Fireplace Heater
    Type Zero Clearance Grates

Lower home heating expenses with the Custom Zero-Clearance Fireplace Heater Kit. This fireplace heat gives to the enjoyment of comforting warmth that the you won't be able to get fully from a common fireplace. The natural heat of 80% created by traditional hearths is gets lost through the chimney. This high performing energy-efficient fireplace blower provides an increased heat temperature to go around your home at a low heating cost. This grate heater has a unique setup to superheat the air inside the exchanger tubes to over 500°F, enabling it to send out up to 60,000 BTUs of heat, sufficient to give warmth into a large room or two. It excellently fits into most smaller or zero-clearance (pre-fab) fireplaces, and operates without that use of power by converting heat naturally through the heavy aluminized steel tubing, then distributed into your home. These sturdy aluminum tubes deliver a lasting usage of this product.

Product Note: Please see additional info tab for a list of all dimensions.

The optional blower has the capacity to send out up to 60,000 BTUs of heat when used with the hearth heater. This blower is installed on either the left or right side of your Fireplace Hearth Heater. Five and six tube units have a 2-speed blower (50 CFM - High, 30 CFM - Low). Units with seven or more tubes have a 148 CFM blower with a variable speed control.

  • This product gives a low cost heat energy.
  • It delivers up to 48,000 BTUs of heat or more with the six through ten-tube models - read the Additional Info tab for more details.
  • This fireplace blower fits smaller fireplaces.
  • It presents a 1 year warranty.
  • Get this into your home with a simple installation.
  • It offers 500% heat output increase.
  • Each unit has heavy tubing for long life use.
  • It works during power outages.
  • The Heat Pipes are made of a 0.063-gauge aluminized steel which inhibits burn through and rust.
  • The sizes in special order require three to four weeks to manufacture.

For larger fireplaces, see the Fireplace Heater.

Note: This heater may be used with a gas log lighter as long as clearances allow for placement under the grate.

BEFORE YOU BURN: Normally, there will be a smell on the first burn as the oil in the tubes will burn off. WARNING: If you have birds and animals in the house, they should be removed from the house on the first burn. People that are asthmatic and children should also not be in the area during the first burn.


Additional Information:
Number of Tubes Front Width Rear Width Front Height Rear Height Depth BTU Per Hour (Max)*
4 Tubes (standard size) 14 1/8" 14 1/8" 17 7/8" 14 1/2" 17 1/4" up to 48,000
5 Tubes (custom size) 18 1/8" 18 1/8" 17 7/8" 14 1/2" 17 1/4" up to 58,000
6 Tubes (custom size) 22" 22" 17 7/8" 14 1/2" 17 1/4" up to 68,000
7 Tubes (custom size) 25 1/2" 25 1/2" 17 7/8" 14 1/2" 17 1/4" up to 78,000
8 Tubes (custom size) 29 3/4" 29 3/4" 17 7/8" 14 1/2" 17 1/4" up to 88,000
9 Tubes (custom size) 33 5/8" 33 5/8" 17 7/8" 14 1/2" 17 1/4" up to 98,000
10 Tubes (custom size) 37 1/2" 37 1/2" 17 7/8" 14 1/2" 17 1/4" up to 108,000
* BTU output will vary depending on type of wood, size of fire, fireplace size, etc.

  Fireplace Heater Instructions


Specifications:
  • Low cost
  • Delivers up to 48,000 BTU's of heat (or more with 6 thru 10 tube models - see Additional Info tab
  • For use in smaller fireplaces
  • Simple installation
  • 500% heat output increase
  • Heavy tubing for long life
  • Works without power
  • Heat Pipes are made of .063 gauge aluminized steel which inhibits burn thru and rust.
  • 16 gauge aluminized metal tubing
  • Diameter of tubes 1-3/4"

Optional Blower
  • Delivers up to 60,000 BTU's of heat when used with a hearth heater
  • Units with 5 or 6 tubes have a 2 speed blower (50 CFM - High, 30 CFM - Low). Units with 7 or more tubes have a 148 CFM blower with a variable speed control.
  • 1 year warranty
  • Simple installation
  • 500% heat output increase
  • Trim bar has 4 - 2" diameter holes for attaching to the Zero-Clearance Fireplace Heater.
  • Flexible blower connector is adjustable from 8" to 18".
  • Blower Box can mount on left or right side by flipping the manifold.
Clearance Non-Clearance
Country Of Origin United States
Product Type Fireplace Accessories
Product Type Fireplace Grates
Season Everyday
Size 26in to 28in
Size 33in and Over
Size 30in to 32in
Type Bar Grates
Type Fireplace Heater
Type Zero Clearance Grates

SPECIAL OFFER