Case of 25 - 4ft LED T8 Wattage Adjustable & Color Tunable Tube - Type A+B - 12W/15W/18W/20W - 120 Lumens/Watt - 30K/40K/50K/65K

This 4ft LED T8 Universal Type A + B Tube is a perfect pick for any commercial or residential setting including supermarkets, factories, hotels, conference rooms, schools, and offices. LED Tubes are more energy efficient and longer lasting than fluorescent tubes and contain no hazardous materials! Made with aluminum back and frosted polycarbonate plastic lens, these tubes are shatterproof. This tube is an ideal replacement for a 32WT8 fluorescent tube.

This LED Tube is configured for Double-Ended Power, meaning this tube has a live end and a neutral end.

Notable Specs:

• Type A+B
• Case of 25
• 4ft. Length
• Wattage Adjustable - 12W/15W/18W/20W
• 32W Fluorescent Tube Equivalent
• 120 Lumens/Watt
• 80 CRI
• Non-Dimmable
• Color Tunable - 3000K/4000K/5000K/6500K
• 130° Beam Angle
• AC100-277V Input Voltage
• Single & Double Ended Power
• Frosted polycarbonate (PC) plastic lens with aluminum back
• ETL Listed, UL Listed

Dimension (of one LED Linear Tube) - 47.72" L x 1.19" W x 1.19" H

Discover the Benefits of Plug and Play LED Tubes

Plug and Play LED Tubes are here to stay! They make it easy to replace fluorescent tubes and upgrade your space with bright LED light. Plug and play tubes are easy to install. The process is easy as Step 1, 2, and 3.*

1. Turn off power to the light being changed before installation using the switch on the breaker panel.
2. Remove the fluorescent tubes. Remember - Fluorescent tubes contain mercury and should be disposed of properly.
3. Install the LED tubes and turn the power back on.

*Please make sure to read the instruction manual of the LED tubes and fixture the tubes are being installed into as the above instructions may not be 100% correct per the specific tubes or product.

Can you put led tube lights in a fluorescent fixture? Can I replace my fluorescent T8 linear bulbs with LEDs?

Yes! LED Tubes can be installed into a fluorescent fixture. When tubes are Type A + B. Type A or Type B, it is easy to replace those flickering fluorescents. A brief explanation of Type A and B LED linear tubes is below.

Type A LED Linear Tubes are often called "plug and play" tubes. This is because they can simply be installed into the existing fixture.

Type B LED Linear Tubes are often referred to as "ballast bypass." They work with all fluorescent fixtures including ballast-free fixtures. Type B linear tubes power goes directly to the lamp sockets and no longer through the ballast.

Type A + B can be used with or without a ballast. It is ultimately the buyer's preference what they want to do. Type A installation uses the LED Tube + Ballast power for more energy consumption compared to Type B installation only uses the raw tube power and is more energy-efficient.

What does ballast bypass mean? How does ballast bypass work?

Ballast bypass means when installing the LED linear tube, the fixture's ballast will need to be removed first. The power will then go directly to the lamp sockets and no longer through the ballast. The benefits of ballast bypass LED replacement tubes include lights not being shut down by a ballast failure, no more ballast replacements, and savings on the energy bill because energy is no longer drawing from the ballast.

Emergency Drivers: Constant-power emergency drivers with 90-minute run time are available to add on to your LED high bays to increase fire safety and comply with local fire safety codes. Check out our selection of LED emergency drivers.

Want to learn more about getting our products at wholesale discounts? Buy LightUp LED Products in Bulk by completing the form on our wholesale page.

Check out all that LightUp has to offer on weekly specials, new products, categories and more on our home page!